123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280228122822283228422852286228722882289229022912292229322942295229622972298229923002301230223032304230523062307230823092310231123122313231423152316231723182319232023212322232323242325232623272328232923302331233223332334233523362337233823392340234123422343234423452346234723482349235023512352235323542355235623572358235923602361236223632364236523662367236823692370237123722373237423752376237723782379238023812382238323842385238623872388238923902391239223932394239523962397239823992400240124022403240424052406240724082409241024112412241324142415241624172418241924202421242224232424242524262427242824292430243124322433243424352436243724382439244024412442244324442445244624472448244924502451245224532454245524562457245824592460246124622463246424652466246724682469247024712472247324742475247624772478247924802481248224832484248524862487248824892490249124922493249424952496249724982499250025012502250325042505250625072508250925102511251225132514251525162517251825192520252125222523252425252526252725282529253025312532253325342535253625372538253925402541254225432544254525462547254825492550255125522553255425552556255725582559256025612562256325642565256625672568256925702571257225732574257525762577257825792580258125822583258425852586258725882589259025912592259325942595259625972598259926002601260226032604260526062607260826092610261126122613261426152616261726182619262026212622262326242625262626272628262926302631263226332634263526362637263826392640264126422643264426452646264726482649265026512652265326542655265626572658265926602661266226632664266526662667266826692670267126722673267426752676267726782679268026812682268326842685268626872688268926902691269226932694269526962697269826992700270127022703270427052706270727082709271027112712271327142715271627172718271927202721272227232724272527262727272827292730273127322733273427352736273727382739274027412742274327442745274627472748274927502751275227532754275527562757275827592760276127622763276427652766276727682769277027712772277327742775277627772778277927802781278227832784278527862787278827892790279127922793279427952796279727982799280028012802280328042805280628072808280928102811281228132814281528162817281828192820282128222823282428252826282728282829283028312832283328342835283628372838283928402841284228432844284528462847284828492850285128522853285428552856285728582859286028612862286328642865286628672868286928702871287228732874287528762877287828792880288128822883288428852886288728882889289028912892289328942895289628972898289929002901290229032904290529062907290829092910291129122913291429152916291729182919292029212922292329242925292629272928292929302931293229332934293529362937293829392940294129422943294429452946294729482949295029512952295329542955295629572958295929602961296229632964296529662967296829692970297129722973297429752976297729782979298029812982298329842985298629872988298929902991299229932994299529962997299829993000300130023003300430053006300730083009301030113012301330143015301630173018301930203021302230233024302530263027302830293030303130323033303430353036303730383039304030413042304330443045304630473048304930503051305230533054305530563057305830593060306130623063306430653066306730683069307030713072307330743075307630773078307930803081308230833084308530863087308830893090309130923093309430953096309730983099310031013102310331043105310631073108310931103111311231133114311531163117311831193120312131223123312431253126312731283129313031313132313331343135313631373138313931403141314231433144314531463147314831493150315131523153315431553156315731583159316031613162316331643165316631673168316931703171317231733174317531763177317831793180318131823183318431853186318731883189319031913192319331943195319631973198319932003201320232033204320532063207320832093210321132123213321432153216321732183219322032213222322332243225322632273228322932303231323232333234323532363237323832393240324132423243324432453246324732483249325032513252325332543255325632573258325932603261326232633264326532663267326832693270327132723273327432753276327732783279328032813282328332843285328632873288328932903291329232933294329532963297329832993300330133023303330433053306330733083309331033113312331333143315331633173318331933203321332233233324332533263327332833293330333133323333333433353336333733383339334033413342334333443345334633473348334933503351335233533354335533563357335833593360336133623363336433653366336733683369337033713372337333743375337633773378337933803381338233833384338533863387338833893390339133923393339433953396339733983399340034013402340334043405340634073408340934103411341234133414341534163417341834193420342134223423342434253426342734283429343034313432343334343435343634373438343934403441344234433444344534463447344834493450345134523453345434553456345734583459346034613462346334643465346634673468346934703471347234733474347534763477347834793480348134823483348434853486348734883489349034913492349334943495349634973498349935003501350235033504350535063507350835093510351135123513351435153516351735183519352035213522352335243525352635273528352935303531353235333534353535363537353835393540354135423543354435453546354735483549355035513552355335543555355635573558355935603561356235633564356535663567356835693570357135723573357435753576357735783579358035813582358335843585358635873588358935903591359235933594359535963597359835993600360136023603360436053606360736083609361036113612361336143615361636173618361936203621362236233624362536263627362836293630363136323633363436353636363736383639364036413642364336443645364636473648364936503651365236533654365536563657365836593660366136623663366436653666366736683669367036713672367336743675367636773678367936803681368236833684368536863687368836893690369136923693369436953696369736983699370037013702370337043705370637073708370937103711371237133714371537163717371837193720372137223723372437253726372737283729373037313732373337343735373637373738373937403741374237433744374537463747374837493750375137523753375437553756375737583759376037613762376337643765376637673768376937703771377237733774377537763777377837793780378137823783378437853786378737883789379037913792379337943795379637973798379938003801380238033804380538063807380838093810381138123813381438153816381738183819382038213822382338243825382638273828382938303831383238333834383538363837383838393840384138423843384438453846384738483849385038513852385338543855385638573858385938603861386238633864386538663867386838693870387138723873387438753876387738783879388038813882388338843885388638873888388938903891389238933894389538963897389838993900390139023903390439053906390739083909391039113912391339143915391639173918391939203921392239233924392539263927392839293930393139323933393439353936393739383939394039413942394339443945394639473948394939503951395239533954395539563957395839593960396139623963396439653966396739683969397039713972397339743975397639773978397939803981398239833984398539863987398839893990399139923993399439953996399739983999400040014002400340044005400640074008400940104011401240134014401540164017401840194020402140224023402440254026402740284029403040314032403340344035403640374038403940404041404240434044404540464047404840494050405140524053405440554056405740584059406040614062406340644065406640674068406940704071407240734074407540764077407840794080408140824083408440854086408740884089409040914092409340944095409640974098409941004101410241034104410541064107410841094110411141124113411441154116411741184119412041214122412341244125412641274128412941304131413241334134413541364137413841394140414141424143414441454146414741484149415041514152415341544155415641574158415941604161416241634164416541664167416841694170417141724173417441754176417741784179418041814182418341844185418641874188418941904191419241934194419541964197419841994200420142024203420442054206420742084209421042114212421342144215421642174218421942204221422242234224422542264227422842294230423142324233423442354236423742384239424042414242424342444245424642474248424942504251425242534254425542564257425842594260426142624263426442654266426742684269427042714272427342744275427642774278427942804281428242834284428542864287428842894290429142924293429442954296429742984299430043014302430343044305430643074308430943104311431243134314431543164317431843194320432143224323432443254326432743284329433043314332433343344335433643374338433943404341434243434344434543464347434843494350435143524353435443554356435743584359436043614362436343644365436643674368436943704371437243734374437543764377437843794380438143824383438443854386438743884389439043914392439343944395439643974398439944004401440244034404440544064407440844094410441144124413441444154416441744184419442044214422442344244425442644274428442944304431443244334434443544364437443844394440444144424443444444454446444744484449445044514452445344544455445644574458445944604461446244634464446544664467446844694470447144724473447444754476447744784479448044814482448344844485448644874488448944904491449244934494449544964497449844994500450145024503450445054506450745084509451045114512451345144515451645174518451945204521452245234524452545264527452845294530453145324533453445354536453745384539454045414542454345444545454645474548454945504551455245534554455545564557455845594560456145624563456445654566456745684569457045714572457345744575457645774578457945804581458245834584458545864587458845894590459145924593459445954596459745984599460046014602460346044605460646074608460946104611461246134614461546164617461846194620462146224623462446254626462746284629463046314632463346344635463646374638463946404641464246434644464546464647464846494650465146524653465446554656465746584659466046614662466346644665466646674668466946704671467246734674467546764677467846794680468146824683468446854686468746884689469046914692469346944695469646974698469947004701470247034704470547064707470847094710471147124713471447154716471747184719472047214722472347244725472647274728472947304731473247334734473547364737473847394740474147424743474447454746474747484749475047514752475347544755 |
- <?php
- /**
- * GeSHi - Generic Syntax Highlighter
- *
- * The GeSHi class for Generic Syntax Highlighting. Please refer to the
- * documentation at http://qbnz.com/highlighter/documentation.php for more
- * information about how to use this class.
- *
- * For changes, release notes, TODOs etc, see the relevant files in the docs/
- * directory.
- *
- * This file is part of GeSHi.
- *
- * GeSHi is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * GeSHi is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with GeSHi; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * @package geshi
- * @subpackage core
- * @author Nigel McNie <nigel@geshi.org>, Benny Baumann <BenBE@omorphia.de>
- * @copyright (C) 2004 - 2007 Nigel McNie, (C) 2007 - 2008 Benny Baumann
- * @license http://gnu.org/copyleft/gpl.html GNU GPL
- *
- */
- //
- // GeSHi Constants
- // You should use these constant names in your programs instead of
- // their values - you never know when a value may change in a future
- // version
- //
- /** The version of this GeSHi file */
- define('GESHI_VERSION', '1.0.8.10');
- // Define the root directory for the GeSHi code tree
- if (!defined('GESHI_ROOT')) {
- /** The root directory for GeSHi */
- define('GESHI_ROOT', dirname(__FILE__) . DIRECTORY_SEPARATOR);
- }
- /** The language file directory for GeSHi
- @access private */
- define('GESHI_LANG_ROOT', GESHI_ROOT . 'geshi' . DIRECTORY_SEPARATOR);
- // Define if GeSHi should be paranoid about security
- if (!defined('GESHI_SECURITY_PARANOID')) {
- /** Tells GeSHi to be paranoid about security settings */
- define('GESHI_SECURITY_PARANOID', false);
- }
- // Line numbers - use with enable_line_numbers()
- /** Use no line numbers when building the result */
- define('GESHI_NO_LINE_NUMBERS', 0);
- /** Use normal line numbers when building the result */
- define('GESHI_NORMAL_LINE_NUMBERS', 1);
- /** Use fancy line numbers when building the result */
- define('GESHI_FANCY_LINE_NUMBERS', 2);
- // Container HTML type
- /** Use nothing to surround the source */
- define('GESHI_HEADER_NONE', 0);
- /** Use a "div" to surround the source */
- define('GESHI_HEADER_DIV', 1);
- /** Use a "pre" to surround the source */
- define('GESHI_HEADER_PRE', 2);
- /** Use a pre to wrap lines when line numbers are enabled or to wrap the whole code. */
- define('GESHI_HEADER_PRE_VALID', 3);
- /**
- * Use a "table" to surround the source:
- *
- * <table>
- * <thead><tr><td colspan="2">$header</td></tr></thead>
- * <tbody><tr><td><pre>$linenumbers</pre></td><td><pre>$code></pre></td></tr></tbody>
- * <tfooter><tr><td colspan="2">$footer</td></tr></tfoot>
- * </table>
- *
- * this is essentially only a workaround for Firefox, see sf#1651996 or take a look at
- * https://bugzilla.mozilla.org/show_bug.cgi?id=365805
- * @note when linenumbers are disabled this is essentially the same as GESHI_HEADER_PRE
- */
- define('GESHI_HEADER_PRE_TABLE', 4);
- // Capatalisation constants
- /** Lowercase keywords found */
- define('GESHI_CAPS_NO_CHANGE', 0);
- /** Uppercase keywords found */
- define('GESHI_CAPS_UPPER', 1);
- /** Leave keywords found as the case that they are */
- define('GESHI_CAPS_LOWER', 2);
- // Link style constants
- /** Links in the source in the :link state */
- define('GESHI_LINK', 0);
- /** Links in the source in the :hover state */
- define('GESHI_HOVER', 1);
- /** Links in the source in the :active state */
- define('GESHI_ACTIVE', 2);
- /** Links in the source in the :visited state */
- define('GESHI_VISITED', 3);
- // Important string starter/finisher
- // Note that if you change these, they should be as-is: i.e., don't
- // write them as if they had been run through htmlentities()
- /** The starter for important parts of the source */
- define('GESHI_START_IMPORTANT', '<BEGIN GeSHi>');
- /** The ender for important parts of the source */
- define('GESHI_END_IMPORTANT', '<END GeSHi>');
- /**#@+
- * @access private
- */
- // When strict mode applies for a language
- /** Strict mode never applies (this is the most common) */
- define('GESHI_NEVER', 0);
- /** Strict mode *might* apply, and can be enabled or
- disabled by {@link GeSHi->enable_strict_mode()} */
- define('GESHI_MAYBE', 1);
- /** Strict mode always applies */
- define('GESHI_ALWAYS', 2);
- // Advanced regexp handling constants, used in language files
- /** The key of the regex array defining what to search for */
- define('GESHI_SEARCH', 0);
- /** The key of the regex array defining what bracket group in a
- matched search to use as a replacement */
- define('GESHI_REPLACE', 1);
- /** The key of the regex array defining any modifiers to the regular expression */
- define('GESHI_MODIFIERS', 2);
- /** The key of the regex array defining what bracket group in a
- matched search to put before the replacement */
- define('GESHI_BEFORE', 3);
- /** The key of the regex array defining what bracket group in a
- matched search to put after the replacement */
- define('GESHI_AFTER', 4);
- /** The key of the regex array defining a custom keyword to use
- for this regexp's html tag class */
- define('GESHI_CLASS', 5);
- /** Used in language files to mark comments */
- define('GESHI_COMMENTS', 0);
- /** Used to work around missing PHP features **/
- define('GESHI_PHP_PRE_433', !(version_compare(PHP_VERSION, '4.3.3') === 1));
- /** make sure we can call stripos **/
- if (!function_exists('stripos')) {
- // the offset param of preg_match is not supported below PHP 4.3.3
- if (GESHI_PHP_PRE_433) {
- /**
- * @ignore
- */
- function stripos($haystack, $needle, $offset = null) {
- if (!is_null($offset)) {
- $haystack = substr($haystack, $offset);
- }
- if (preg_match('/'. preg_quote($needle, '/') . '/', $haystack, $match, PREG_OFFSET_CAPTURE)) {
- return $match[0][1];
- }
- return false;
- }
- }
- else {
- /**
- * @ignore
- */
- function stripos($haystack, $needle, $offset = null) {
- if (preg_match('/'. preg_quote($needle, '/') . '/', $haystack, $match, PREG_OFFSET_CAPTURE, $offset)) {
- return $match[0][1];
- }
- return false;
- }
- }
- }
- /** some old PHP / PCRE subpatterns only support up to xxx subpatterns in
- regular expressions. Set this to false if your PCRE lib is up to date
- @see GeSHi->optimize_regexp_list()
- **/
- define('GESHI_MAX_PCRE_SUBPATTERNS', 500);
- /** it's also important not to generate too long regular expressions
- be generous here... but keep in mind, that when reaching this limit we
- still have to close open patterns. 12k should do just fine on a 16k limit.
- @see GeSHi->optimize_regexp_list()
- **/
- define('GESHI_MAX_PCRE_LENGTH', 12288);
- //Number format specification
- /** Basic number format for integers */
- define('GESHI_NUMBER_INT_BASIC', 1); //Default integers \d+
- /** Enhanced number format for integers like seen in C */
- define('GESHI_NUMBER_INT_CSTYLE', 2); //Default C-Style \d+[lL]?
- /** Number format to highlight binary numbers with a suffix "b" */
- define('GESHI_NUMBER_BIN_SUFFIX', 16); //[01]+[bB]
- /** Number format to highlight binary numbers with a prefix % */
- define('GESHI_NUMBER_BIN_PREFIX_PERCENT', 32); //%[01]+
- /** Number format to highlight binary numbers with a prefix 0b (C) */
- define('GESHI_NUMBER_BIN_PREFIX_0B', 64); //0b[01]+
- /** Number format to highlight octal numbers with a leading zero */
- define('GESHI_NUMBER_OCT_PREFIX', 256); //0[0-7]+
- /** Number format to highlight octal numbers with a prefix 0o (logtalk) */
- define('GESHI_NUMBER_OCT_PREFIX_0O', 512); //0[0-7]+
- /** Number format to highlight octal numbers with a leading @ (Used in HiSofts Devpac series). */
- define('GESHI_NUMBER_OCT_PREFIX_AT', 1024); //@[0-7]+
- /** Number format to highlight octal numbers with a suffix of o */
- define('GESHI_NUMBER_OCT_SUFFIX', 2048); //[0-7]+[oO]
- /** Number format to highlight hex numbers with a prefix 0x */
- define('GESHI_NUMBER_HEX_PREFIX', 4096); //0x[0-9a-fA-F]+
- /** Number format to highlight hex numbers with a prefix $ */
- define('GESHI_NUMBER_HEX_PREFIX_DOLLAR', 8192); //$[0-9a-fA-F]+
- /** Number format to highlight hex numbers with a suffix of h */
- define('GESHI_NUMBER_HEX_SUFFIX', 16384); //[0-9][0-9a-fA-F]*h
- /** Number format to highlight floating-point numbers without support for scientific notation */
- define('GESHI_NUMBER_FLT_NONSCI', 65536); //\d+\.\d+
- /** Number format to highlight floating-point numbers without support for scientific notation */
- define('GESHI_NUMBER_FLT_NONSCI_F', 131072); //\d+(\.\d+)?f
- /** Number format to highlight floating-point numbers with support for scientific notation (E) and optional leading zero */
- define('GESHI_NUMBER_FLT_SCI_SHORT', 262144); //\.\d+e\d+
- /** Number format to highlight floating-point numbers with support for scientific notation (E) and required leading digit */
- define('GESHI_NUMBER_FLT_SCI_ZERO', 524288); //\d+(\.\d+)?e\d+
- //Custom formats are passed by RX array
- // Error detection - use these to analyse faults
- /** No sourcecode to highlight was specified
- * @deprecated
- */
- define('GESHI_ERROR_NO_INPUT', 1);
- /** The language specified does not exist */
- define('GESHI_ERROR_NO_SUCH_LANG', 2);
- /** GeSHi could not open a file for reading (generally a language file) */
- define('GESHI_ERROR_FILE_NOT_READABLE', 3);
- /** The header type passed to {@link GeSHi->set_header_type()} was invalid */
- define('GESHI_ERROR_INVALID_HEADER_TYPE', 4);
- /** The line number type passed to {@link GeSHi->enable_line_numbers()} was invalid */
- define('GESHI_ERROR_INVALID_LINE_NUMBER_TYPE', 5);
- /**#@-*/
- /**
- * The GeSHi Class.
- *
- * Please refer to the documentation for GeSHi 1.0.X that is available
- * at http://qbnz.com/highlighter/documentation.php for more information
- * about how to use this class.
- *
- * @package geshi
- * @author Nigel McNie <nigel@geshi.org>, Benny Baumann <BenBE@omorphia.de>
- * @copyright (C) 2004 - 2007 Nigel McNie, (C) 2007 - 2008 Benny Baumann
- */
- class GeSHi {
- /**#@+
- * @access private
- */
- /**
- * The source code to highlight
- * @var string
- */
- var $source = '';
- /**
- * The language to use when highlighting
- * @var string
- */
- var $language = '';
- /**
- * The data for the language used
- * @var array
- */
- var $language_data = array();
- /**
- * The path to the language files
- * @var string
- */
- var $language_path = GESHI_LANG_ROOT;
- /**
- * The error message associated with an error
- * @var string
- * @todo check err reporting works
- */
- var $error = false;
- /**
- * Possible error messages
- * @var array
- */
- var $error_messages = array(
- GESHI_ERROR_NO_SUCH_LANG => 'GeSHi could not find the language {LANGUAGE} (using path {PATH})',
- GESHI_ERROR_FILE_NOT_READABLE => 'The file specified for load_from_file was not readable',
- GESHI_ERROR_INVALID_HEADER_TYPE => 'The header type specified is invalid',
- GESHI_ERROR_INVALID_LINE_NUMBER_TYPE => 'The line number type specified is invalid'
- );
- /**
- * Whether highlighting is strict or not
- * @var boolean
- */
- var $strict_mode = false;
- /**
- * Whether to use CSS classes in output
- * @var boolean
- */
- var $use_classes = false;
- /**
- * The type of header to use. Can be one of the following
- * values:
- *
- * - GESHI_HEADER_PRE: Source is outputted in a "pre" HTML element.
- * - GESHI_HEADER_DIV: Source is outputted in a "div" HTML element.
- * - GESHI_HEADER_NONE: No header is outputted.
- *
- * @var int
- */
- var $header_type = GESHI_HEADER_PRE;
- /**
- * Array of permissions for which lexics should be highlighted
- * @var array
- */
- var $lexic_permissions = array(
- 'KEYWORDS' => array(),
- 'COMMENTS' => array('MULTI' => true),
- 'REGEXPS' => array(),
- 'ESCAPE_CHAR' => true,
- 'BRACKETS' => true,
- 'SYMBOLS' => false,
- 'STRINGS' => true,
- 'NUMBERS' => true,
- 'METHODS' => true,
- 'SCRIPT' => true
- );
- /**
- * The time it took to parse the code
- * @var double
- */
- var $time = 0;
- /**
- * The content of the header block
- * @var string
- */
- var $header_content = '';
- /**
- * The content of the footer block
- * @var string
- */
- var $footer_content = '';
- /**
- * The style of the header block
- * @var string
- */
- var $header_content_style = '';
- /**
- * The style of the footer block
- * @var string
- */
- var $footer_content_style = '';
- /**
- * Tells if a block around the highlighted source should be forced
- * if not using line numbering
- * @var boolean
- */
- var $force_code_block = false;
- /**
- * The styles for hyperlinks in the code
- * @var array
- */
- var $link_styles = array();
- /**
- * Whether important blocks should be recognised or not
- * @var boolean
- * @deprecated
- * @todo REMOVE THIS FUNCTIONALITY!
- */
- var $enable_important_blocks = false;
- /**
- * Styles for important parts of the code
- * @var string
- * @deprecated
- * @todo As above - rethink the whole idea of important blocks as it is buggy and
- * will be hard to implement in 1.2
- */
- var $important_styles = 'font-weight: bold; color: red;'; // Styles for important parts of the code
- /**
- * Whether CSS IDs should be added to the code
- * @var boolean
- */
- var $add_ids = false;
- /**
- * Lines that should be highlighted extra
- * @var array
- */
- var $highlight_extra_lines = array();
- /**
- * Styles of lines that should be highlighted extra
- * @var array
- */
- var $highlight_extra_lines_styles = array();
- /**
- * Styles of extra-highlighted lines
- * @var string
- */
- var $highlight_extra_lines_style = 'background-color: #ffc;';
- /**
- * The line ending
- * If null, nl2br() will be used on the result string.
- * Otherwise, all instances of \n will be replaced with $line_ending
- * @var string
- */
- var $line_ending = null;
- /**
- * Number at which line numbers should start at
- * @var int
- */
- var $line_numbers_start = 1;
- /**
- * The overall style for this code block
- * @var string
- */
- var $overall_style = 'font-family:monospace;';
- /**
- * The style for the actual code
- * @var string
- */
- var $code_style = 'font: normal normal 1em/1.2em monospace; margin:0; padding:0; background:none; vertical-align:top;';
- /**
- * The overall class for this code block
- * @var string
- */
- var $overall_class = '';
- /**
- * The overall ID for this code block
- * @var string
- */
- var $overall_id = '';
- /**
- * Line number styles
- * @var string
- */
- var $line_style1 = 'font-weight: normal; vertical-align:top;';
- /**
- * Line number styles for fancy lines
- * @var string
- */
- var $line_style2 = 'font-weight: bold; vertical-align:top;';
- /**
- * Style for line numbers when GESHI_HEADER_PRE_TABLE is chosen
- * @var string
- */
- var $table_linenumber_style = 'width:1px;text-align:right;margin:0;padding:0 2px;vertical-align:top;';
- /**
- * Flag for how line numbers are displayed
- * @var boolean
- */
- var $line_numbers = GESHI_NO_LINE_NUMBERS;
- /**
- * Flag to decide if multi line spans are allowed. Set it to false to make sure
- * each tag is closed before and reopened after each linefeed.
- * @var boolean
- */
- var $allow_multiline_span = true;
- /**
- * The "nth" value for fancy line highlighting
- * @var int
- */
- var $line_nth_row = 0;
- /**
- * The size of tab stops
- * @var int
- */
- var $tab_width = 8;
- /**
- * Should we use language-defined tab stop widths?
- * @var int
- */
- var $use_language_tab_width = false;
- /**
- * Default target for keyword links
- * @var string
- */
- var $link_target = '';
- /**
- * The encoding to use for entity encoding
- * NOTE: Used with Escape Char Sequences to fix UTF-8 handling (cf. SF#2037598)
- * @var string
- */
- var $encoding = 'utf-8';
- /**
- * Should keywords be linked?
- * @var boolean
- */
- var $keyword_links = true;
- /**
- * Currently loaded language file
- * @var string
- * @since 1.0.7.22
- */
- var $loaded_language = '';
- /**
- * Wether the caches needed for parsing are built or not
- *
- * @var bool
- * @since 1.0.8
- */
- var $parse_cache_built = false;
- /**
- * Work around for Suhosin Patch with disabled /e modifier
- *
- * Note from suhosins author in config file:
- * <blockquote>
- * The /e modifier inside <code>preg_replace()</code> allows code execution.
- * Often it is the cause for remote code execution exploits. It is wise to
- * deactivate this feature and test where in the application it is used.
- * The developer using the /e modifier should be made aware that he should
- * use <code>preg_replace_callback()</code> instead
- * </blockquote>
- *
- * @var array
- * @since 1.0.8
- */
- var $_kw_replace_group = 0;
- var $_rx_key = 0;
- /**
- * some "callback parameters" for handle_multiline_regexps
- *
- * @since 1.0.8
- * @access private
- * @var string
- */
- var $_hmr_before = '';
- var $_hmr_replace = '';
- var $_hmr_after = '';
- var $_hmr_key = 0;
- /**#@-*/
- /**
- * Creates a new GeSHi object, with source and language
- *
- * @param string The source code to highlight
- * @param string The language to highlight the source with
- * @param string The path to the language file directory. <b>This
- * is deprecated!</b> I've backported the auto path
- * detection from the 1.1.X dev branch, so now it
- * should be automatically set correctly. If you have
- * renamed the language directory however, you will
- * still need to set the path using this parameter or
- * {@link GeSHi->set_language_path()}
- * @since 1.0.0
- */
- function GeSHi($source = '', $language = '', $path = '') {
- if (!empty($source)) {
- $this->set_source($source);
- }
- if (!empty($language)) {
- $this->set_language($language);
- }
- $this->set_language_path($path);
- }
- /**
- * Returns an error message associated with the last GeSHi operation,
- * or false if no error has occured
- *
- * @return string|false An error message if there has been an error, else false
- * @since 1.0.0
- */
- function error() {
- if ($this->error) {
- //Put some template variables for debugging here ...
- $debug_tpl_vars = array(
- '{LANGUAGE}' => $this->language,
- '{PATH}' => $this->language_path
- );
- $msg = str_replace(
- array_keys($debug_tpl_vars),
- array_values($debug_tpl_vars),
- $this->error_messages[$this->error]);
- return "<br /><strong>GeSHi Error:</strong> $msg (code {$this->error})<br />";
- }
- return false;
- }
- /**
- * Gets a human-readable language name (thanks to Simon Patterson
- * for the idea :))
- *
- * @return string The name for the current language
- * @since 1.0.2
- */
- function get_language_name() {
- if (GESHI_ERROR_NO_SUCH_LANG == $this->error) {
- return $this->language_data['LANG_NAME'] . ' (Unknown Language)';
- }
- return $this->language_data['LANG_NAME'];
- }
- /**
- * Sets the source code for this object
- *
- * @param string The source code to highlight
- * @since 1.0.0
- */
- function set_source($source) {
- $this->source = $source;
- $this->highlight_extra_lines = array();
- }
- /**
- * Sets the language for this object
- *
- * @note since 1.0.8 this function won't reset language-settings by default anymore!
- * if you need this set $force_reset = true
- *
- * @param string The name of the language to use
- * @since 1.0.0
- */
- function set_language($language, $force_reset = false) {
- if ($force_reset) {
- $this->loaded_language = false;
- }
- //Clean up the language name to prevent malicious code injection
- $language = preg_replace('#[^a-zA-Z0-9\-_]#', '', $language);
- $language = strtolower($language);
- //Retreive the full filename
- $file_name = $this->language_path . $language . '.php';
- if ($file_name == $this->loaded_language) {
- // this language is already loaded!
- return;
- }
- $this->language = $language;
- $this->error = false;
- $this->strict_mode = GESHI_NEVER;
- //Check if we can read the desired file
- if (!is_readable($file_name)) {
- $this->error = GESHI_ERROR_NO_SUCH_LANG;
- return;
- }
- // Load the language for parsing
- $this->load_language($file_name);
- }
- /**
- * Sets the path to the directory containing the language files. Note
- * that this path is relative to the directory of the script that included
- * geshi.php, NOT geshi.php itself.
- *
- * @param string The path to the language directory
- * @since 1.0.0
- * @deprecated The path to the language files should now be automatically
- * detected, so this method should no longer be needed. The
- * 1.1.X branch handles manual setting of the path differently
- * so this method will disappear in 1.2.0.
- */
- function set_language_path($path) {
- if(strpos($path,':')) {
- //Security Fix to prevent external directories using fopen wrappers.
- if(DIRECTORY_SEPARATOR == "\\") {
- if(!preg_match('#^[a-zA-Z]:#', $path) || false !== strpos($path, ':', 2)) {
- return;
- }
- } else {
- return;
- }
- }
- if(preg_match('#[^/a-zA-Z0-9_\.\-\\\s:]#', $path)) {
- //Security Fix to prevent external directories using fopen wrappers.
- return;
- }
- if(GESHI_SECURITY_PARANOID && false !== strpos($path, '/.')) {
- //Security Fix to prevent external directories using fopen wrappers.
- return;
- }
- if(GESHI_SECURITY_PARANOID && false !== strpos($path, '..')) {
- //Security Fix to prevent external directories using fopen wrappers.
- return;
- }
- if ($path) {
- $this->language_path = ('/' == $path[strlen($path) - 1]) ? $path : $path . '/';
- $this->set_language($this->language); // otherwise set_language_path has no effect
- }
- }
- /**
- * Get supported langs or an associative array lang=>full_name.
- * @param boolean $longnames
- * @return array
- */
- function get_supported_languages($full_names=false)
- {
- // return array
- $back = array();
- // we walk the lang root
- $dir = dir($this->language_path);
- // foreach entry
- while (false !== ($entry = $dir->read()))
- {
- $full_path = $this->language_path.$entry;
- // Skip all dirs
- if (is_dir($full_path)) {
- continue;
- }
- // we only want lang.php files
- if (!preg_match('/^([^.]+)\.php$/', $entry, $matches)) {
- continue;
- }
- // Raw lang name is here
- $langname = $matches[1];
- // We want the fullname too?
- if ($full_names === true)
- {
- if (false !== ($fullname = $this->get_language_fullname($langname)))
- {
- $back[$langname] = $fullname; // we go associative
- }
- }
- else
- {
- // just store raw langname
- $back[] = $langname;
- }
- }
- $dir->close();
- return $back;
- }
- /**
- * Get full_name for a lang or false.
- * @param string $language short langname (html4strict for example)
- * @return mixed
- */
- function get_language_fullname($language)
- {
- //Clean up the language name to prevent malicious code injection
- $language = preg_replace('#[^a-zA-Z0-9\-_]#', '', $language);
- $language = strtolower($language);
- // get fullpath-filename for a langname
- $fullpath = $this->language_path.$language.'.php';
- // we need to get contents :S
- if (false === ($data = file_get_contents($fullpath))) {
- $this->error = sprintf('Geshi::get_lang_fullname() Unknown Language: %s', $language);
- return false;
- }
- // match the langname
- if (!preg_match("/'LANG_NAME'\s*=>\s*'(.+|(?:\\')+)'/", $data, $matches)) {
- $this->error = sprintf('Geshi::get_lang_fullname(%s): Regex can not detect language', $language);
- return false;
- }
- // return fullname for langname
- return stripcslashes($matches[1]);
- }
- /**
- * Sets the type of header to be used.
- *
- * If GESHI_HEADER_DIV is used, the code is surrounded in a "div".This
- * means more source code but more control over tab width and line-wrapping.
- * GESHI_HEADER_PRE means that a "pre" is used - less source, but less
- * control. Default is GESHI_HEADER_PRE.
- *
- * From 1.0.7.2, you can use GESHI_HEADER_NONE to specify that no header code
- * should be outputted.
- *
- * @param int The type of header to be used
- * @since 1.0.0
- */
- function set_header_type($type) {
- //Check if we got a valid header type
- if (!in_array($type, array(GESHI_HEADER_NONE, GESHI_HEADER_DIV,
- GESHI_HEADER_PRE, GESHI_HEADER_PRE_VALID, GESHI_HEADER_PRE_TABLE))) {
- $this->error = GESHI_ERROR_INVALID_HEADER_TYPE;
- return;
- }
- //Set that new header type
- $this->header_type = $type;
- }
- /**
- * Sets the styles for the code that will be outputted
- * when this object is parsed. The style should be a
- * string of valid stylesheet declarations
- *
- * @param string The overall style for the outputted code block
- * @param boolean Whether to merge the styles with the current styles or not
- * @since 1.0.0
- */
- function set_overall_style($style, $preserve_defaults = false) {
- if (!$preserve_defaults) {
- $this->overall_style = $style;
- } else {
- $this->overall_style .= $style;
- }
- }
- /**
- * Sets the overall classname for this block of code. This
- * class can then be used in a stylesheet to style this object's
- * output
- *
- * @param string The class name to use for this block of code
- * @since 1.0.0
- */
- function set_overall_class($class) {
- $this->overall_class = $class;
- }
- /**
- * Sets the overall id for this block of code. This id can then
- * be used in a stylesheet to style this object's output
- *
- * @param string The ID to use for this block of code
- * @since 1.0.0
- */
- function set_overall_id($id) {
- $this->overall_id = $id;
- }
- /**
- * Sets whether CSS classes should be used to highlight the source. Default
- * is off, calling this method with no arguments will turn it on
- *
- * @param boolean Whether to turn classes on or not
- * @since 1.0.0
- */
- function enable_classes($flag = true) {
- $this->use_classes = ($flag) ? true : false;
- }
- /**
- * Sets the style for the actual code. This should be a string
- * containing valid stylesheet declarations. If $preserve_defaults is
- * true, then styles are merged with the default styles, with the
- * user defined styles having priority
- *
- * Note: Use this method to override any style changes you made to
- * the line numbers if you are using line numbers, else the line of
- * code will have the same style as the line number! Consult the
- * GeSHi documentation for more information about this.
- *
- * @param string The style to use for actual code
- * @param boolean Whether to merge the current styles with the new styles
- * @since 1.0.2
- */
- function set_code_style($style, $preserve_defaults = false) {
- if (!$preserve_defaults) {
- $this->code_style = $style;
- } else {
- $this->code_style .= $style;
- }
- }
- /**
- * Sets the styles for the line numbers.
- *
- * @param string The style for the line numbers that are "normal"
- * @param string|boolean If a string, this is the style of the line
- * numbers that are "fancy", otherwise if boolean then this
- * defines whether the normal styles should be merged with the
- * new normal styles or not
- * @param boolean If set, is the flag for whether to merge the "fancy"
- * styles with the current styles or not
- * @since 1.0.2
- */
- function set_line_style($style1, $style2 = '', $preserve_defaults = false) {
- //Check if we got 2 or three parameters
- if (is_bool($style2)) {
- $preserve_defaults = $style2;
- $style2 = '';
- }
- //Actually set the new styles
- if (!$preserve_defaults) {
- $this->line_style1 = $style1;
- $this->line_style2 = $style2;
- } else {
- $this->line_style1 .= $style1;
- $this->line_style2 .= $style2;
- }
- }
- /**
- * Sets whether line numbers should be displayed.
- *
- * Valid values for the first parameter are:
- *
- * - GESHI_NO_LINE_NUMBERS: Line numbers will not be displayed
- * - GESHI_NORMAL_LINE_NUMBERS: Line numbers will be displayed
- * - GESHI_FANCY_LINE_NUMBERS: Fancy line numbers will be displayed
- *
- * For fancy line numbers, the second parameter is used to signal which lines
- * are to be fancy. For example, if the value of this parameter is 5 then every
- * 5th line will be fancy.
- *
- * @param int How line numbers should be displayed
- * @param int Defines which lines are fancy
- * @since 1.0.0
- */
- function enable_line_numbers($flag, $nth_row = 5) {
- if (GESHI_NO_LINE_NUMBERS != $flag && GESHI_NORMAL_LINE_NUMBERS != $flag
- && GESHI_FANCY_LINE_NUMBERS != $flag) {
- $this->error = GESHI_ERROR_INVALID_LINE_NUMBER_TYPE;
- }
- $this->line_numbers = $flag;
- $this->line_nth_row = $nth_row;
- }
- /**
- * Sets wether spans and other HTML markup generated by GeSHi can
- * span over multiple lines or not. Defaults to true to reduce overhead.
- * Set it to false if you want to manipulate the output or manually display
- * the code in an ordered list.
- *
- * @param boolean Wether multiline spans are allowed or not
- * @since 1.0.7.22
- */
- function enable_multiline_span($flag) {
- $this->allow_multiline_span = (bool) $flag;
- }
- /**
- * Get current setting for multiline spans, see GeSHi->enable_multiline_span().
- *
- * @see enable_multiline_span
- * @return bool
- */
- function get_multiline_span() {
- return $this->allow_multiline_span;
- }
- /**
- * Sets the style for a keyword group. If $preserve_defaults is
- * true, then styles are merged with the default styles, with the
- * user defined styles having priority
- *
- * @param int The key of the keyword group to change the styles of
- * @param string The style to make the keywords
- * @param boolean Whether to merge the new styles with the old or just
- * to overwrite them
- * @since 1.0.0
- */
- function set_keyword_group_style($key, $style, $preserve_defaults = false) {
- //Set the style for this keyword group
- if (!$preserve_defaults) {
- $this->language_data['STYLES']['KEYWORDS'][$key] = $style;
- } else {
- $this->language_data['STYLES']['KEYWORDS'][$key] .= $style;
- }
- //Update the lexic permissions
- if (!isset($this->lexic_permissions['KEYWORDS'][$key])) {
- $this->lexic_permissions['KEYWORDS'][$key] = true;
- }
- }
- /**
- * Turns highlighting on/off for a keyword group
- *
- * @param int The key of the keyword group to turn on or off
- * @param boolean Whether to turn highlighting for that group on or off
- * @since 1.0.0
- */
- function set_keyword_group_highlighting($key, $flag = true) {
- $this->lexic_permissions['KEYWORDS'][$key] = ($flag) ? true : false;
- }
- /**
- * Sets the styles for comment groups. If $preserve_defaults is
- * true, then styles are merged with the default styles, with the
- * user defined styles having priority
- *
- * @param int The key of the comment group to change the styles of
- * @param string The style to make the comments
- * @param boolean Whether to merge the new styles with the old or just
- * to overwrite them
- * @since 1.0.0
- */
- function set_comments_style($key, $style, $preserve_defaults = false) {
- if (!$preserve_defaults) {
- $this->language_data['STYLES']['COMMENTS'][$key] = $style;
- } else {
- $this->language_data['STYLES']['COMMENTS'][$key] .= $style;
- }
- }
- /**
- * Turns highlighting on/off for comment groups
- *
- * @param int The key of the comment group to turn on or off
- * @param boolean Whether to turn highlighting for that group on or off
- * @since 1.0.0
- */
- function set_comments_highlighting($key, $flag = true) {
- $this->lexic_permissions['COMMENTS'][$key] = ($flag) ? true : false;
- }
- /**
- * Sets the styles for escaped characters. If $preserve_defaults is
- * true, then styles are merged with the default styles, with the
- * user defined styles having priority
- *
- * @param string The style to make the escape characters
- * @param boolean Whether to merge the new styles with the old or just
- * to overwrite them
- * @since 1.0.0
- */
- function set_escape_characters_style($style, $preserve_defaults = false, $group = 0) {
- if (!$preserve_defaults) {
- $this->language_data['STYLES']['ESCAPE_CHAR'][$group] = $style;
- } else {
- $this->language_data['STYLES']['ESCAPE_CHAR'][$group] .= $style;
- }
- }
- /**
- * Turns highlighting on/off for escaped characters
- *
- * @param boolean Whether to turn highlighting for escape characters on or off
- * @since 1.0.0
- */
- function set_escape_characters_highlighting($flag = true) {
- $this->lexic_permissions['ESCAPE_CHAR'] = ($flag) ? true : false;
- }
- /**
- * Sets the styles for brackets. If $preserve_defaults is
- * true, then styles are merged with the default styles, with the
- * user defined styles having priority
- *
- * This method is DEPRECATED: use set_symbols_style instead.
- * This method will be removed in 1.2.X
- *
- * @param string The style to make the brackets
- * @param boolean Whether to merge the new styles with the old or just
- * to overwrite them
- * @since 1.0.0
- * @deprecated In favour of set_symbols_style
- */
- function set_brackets_style($style, $preserve_defaults = false) {
- if (!$preserve_defaults) {
- $this->language_data['STYLES']['BRACKETS'][0] = $style;
- } else {
- $this->language_data['STYLES']['BRACKETS'][0] .= $style;
- }
- }
- /**
- * Turns highlighting on/off for brackets
- *
- * This method is DEPRECATED: use set_symbols_highlighting instead.
- * This method will be remove in 1.2.X
- *
- * @param boolean Whether to turn highlighting for brackets on or off
- * @since 1.0.0
- * @deprecated In favour of set_symbols_highlighting
- */
- function set_brackets_highlighting($flag) {
- $this->lexic_permissions['BRACKETS'] = ($flag) ? true : false;
- }
- /**
- * Sets the styles for symbols. If $preserve_defaults is
- * true, then styles are merged with the default styles, with the
- * user defined styles having priority
- *
- * @param string The style to make the symbols
- * @param boolean Whether to merge the new styles with the old or just
- * to overwrite them
- * @param int Tells the group of symbols for which style should be set.
- * @since 1.0.1
- */
- function set_symbols_style($style, $preserve_defaults = false, $group = 0) {
- // Update the style of symbols
- if (!$preserve_defaults) {
- $this->language_data['STYLES']['SYMBOLS'][$group] = $style;
- } else {
- $this->language_data['STYLES']['SYMBOLS'][$group] .= $style;
- }
- // For backward compatibility
- if (0 == $group) {
- $this->set_brackets_style ($style, $preserve_defaults);
- }
- }
- /**
- * Turns highlighting on/off for symbols
- *
- * @param boolean Whether to turn highlighting for symbols on or off
- * @since 1.0.0
- */
- function set_symbols_highlighting($flag) {
- // Update lexic permissions for this symbol group
- $this->lexic_permissions['SYMBOLS'] = ($flag) ? true : false;
- // For backward compatibility
- $this->set_brackets_highlighting ($flag);
- }
- /**
- * Sets the styles for strings. If $preserve_defaults is
- * true, then styles are merged with the default styles, with the
- * user defined styles having priority
- *
- * @param string The style to make the escape characters
- * @param boolean Whether to merge the new styles with the old or just
- * to overwrite them
- * @param int Tells the group of strings for which style should be set.
- * @since 1.0.0
- */
- function set_strings_style($style, $preserve_defaults = false, $group = 0) {
- if (!$preserve_defaults) {
- $this->language_data['STYLES']['STRINGS'][$group] = $style;
- } else {
- $this->language_data['STYLES']['STRINGS'][$group] .= $style;
- }
- }
- /**
- * Turns highlighting on/off for strings
- *
- * @param boolean Whether to turn highlighting for strings on or off
- * @since 1.0.0
- */
- function set_strings_highlighting($flag) {
- $this->lexic_permissions['STRINGS'] = ($flag) ? true : false;
- }
- /**
- * Sets the styles for strict code blocks. If $preserve_defaults is
- * true, then styles are merged with the default styles, with the
- * user defined styles having priority
- *
- * @param string The style to make the script blocks
- * @param boolean Whether to merge the new styles with the old or just
- * to overwrite them
- * @param int Tells the group of script blocks for which style should be set.
- * @since 1.0.8.4
- */
- function set_script_style($style, $preserve_defaults = false, $group = 0) {
- // Update the style of symbols
- if (!$preserve_defaults) {
- $this->language_data['STYLES']['SCRIPT'][$group] = $style;
- } else {
- $this->language_data['STYLES']['SCRIPT'][$group] .= $style;
- }
- }
- /**
- * Sets the styles for numbers. If $preserve_defaults is
- * true, then styles are merged with the default styles, with the
- * user defined styles having priority
- *
- * @param string The style to make the numbers
- * @param boolean Whether to merge the new styles with the old or just
- * to overwrite them
- * @param int Tells the group of numbers for which style should be set.
- * @since 1.0.0
- */
- function set_numbers_style($style, $preserve_defaults = false, $group = 0) {
- if (!$preserve_defaults) {
- $this->language_data['STYLES']['NUMBERS'][$group] = $style;
- } else {
- $this->language_data['STYLES']['NUMBERS'][$group] .= $style;
- }
- }
- /**
- * Turns highlighting on/off for numbers
- *
- * @param boolean Whether to turn highlighting for numbers on or off
- * @since 1.0.0
- */
- function set_numbers_highlighting($flag) {
- $this->lexic_permissions['NUMBERS'] = ($flag) ? true : false;
- }
- /**
- * Sets the styles for methods. $key is a number that references the
- * appropriate "object splitter" - see the language file for the language
- * you are highlighting to get this number. If $preserve_defaults is
- * true, then styles are merged with the default styles, with the
- * user defined styles having priority
- *
- * @param int The key of the object splitter to change the styles of
- * @param string The style to make the methods
- * @param boolean Whether to merge the new styles with the old or just
- * to overwrite them
- * @since 1.0.0
- */
- function set_methods_style($key, $style, $preserve_defaults = false) {
- if (!$preserve_defaults) {
- $this->language_data['STYLES']['METHODS'][$key] = $style;
- } else {
- $this->language_data['STYLES']['METHODS'][$key] .= $style;
- }
- }
- /**
- * Turns highlighting on/off for methods
- *
- * @param boolean Whether to turn highlighting for methods on or off
- * @since 1.0.0
- */
- function set_methods_highlighting($flag) {
- $this->lexic_permissions['METHODS'] = ($flag) ? true : false;
- }
- /**
- * Sets the styles for regexps. If $preserve_defaults is
- * true, then styles are merged with the default styles, with the
- * user defined styles having priority
- *
- * @param string The style to make the regular expression matches
- * @param boolean Whether to merge the new styles with the old or just
- * to overwrite them
- * @since 1.0.0
- */
- function set_regexps_style($key, $style, $preserve_defaults = false) {
- if (!$preserve_defaults) {
- $this->language_data['STYLES']['REGEXPS'][$key] = $style;
- } else {
- $this->language_data['STYLES']['REGEXPS'][$key] .= $style;
- }
- }
- /**
- * Turns highlighting on/off for regexps
- *
- * @param int The key of the regular expression group to turn on or off
- * @param boolean Whether to turn highlighting for the regular expression group on or off
- * @since 1.0.0
- */
- function set_regexps_highlighting($key, $flag) {
- $this->lexic_permissions['REGEXPS'][$key] = ($flag) ? true : false;
- }
- /**
- * Sets whether a set of keywords are checked for in a case sensitive manner
- *
- * @param int The key of the keyword group to change the case sensitivity of
- * @param boolean Whether to check in a case sensitive manner or not
- * @since 1.0.0
- */
- function set_case_sensitivity($key, $case) {
- $this->language_data['CASE_SENSITIVE'][$key] = ($case) ? true : false;
- }
- /**
- * Sets the case that keywords should use when found. Use the constants:
- *
- * - GESHI_CAPS_NO_CHANGE: leave keywords as-is
- * - GESHI_CAPS_UPPER: convert all keywords to uppercase where found
- * - GESHI_CAPS_LOWER: convert all keywords to lowercase where found
- *
- * @param int A constant specifying what to do with matched keywords
- * @since 1.0.1
- */
- function set_case_keywords($case) {
- if (in_array($case, array(
- GESHI_CAPS_NO_CHANGE, GESHI_CAPS_UPPER, GESHI_CAPS_LOWER))) {
- $this->language_data['CASE_KEYWORDS'] = $case;
- }
- }
- /**
- * Sets how many spaces a tab is substituted for
- *
- * Widths below zero are ignored
- *
- * @param int The tab width
- * @since 1.0.0
- */
- function set_tab_width($width) {
- $this->tab_width = intval($width);
- //Check if it fit's the constraints:
- if ($this->tab_width < 1) {
- //Return it to the default
- $this->tab_width = 8;
- }
- }
- /**
- * Sets whether or not to use tab-stop width specifed by language
- *
- * @param boolean Whether to use language-specific tab-stop widths
- * @since 1.0.7.20
- */
- function set_use_language_tab_width($use) {
- $this->use_language_tab_width = (bool) $use;
- }
- /**
- * Returns the tab width to use, based on the current language and user
- * preference
- *
- * @return int Tab width
- * @since 1.0.7.20
- */
- function get_real_tab_width() {
- if (!$this->use_language_tab_width ||
- !isset($this->language_data['TAB_WIDTH'])) {
- return $this->tab_width;
- } else {
- return $this->language_data['TAB_WIDTH'];
- }
- }
- /**
- * Enables/disables strict highlighting. Default is off, calling this
- * method without parameters will turn it on. See documentation
- * for more details on strict mode and where to use it.
- *
- * @param boolean Whether to enable strict mode or not
- * @since 1.0.0
- */
- function enable_strict_mode($mode = true) {
- if (GESHI_MAYBE == $this->language_data['STRICT_MODE_APPLIES']) {
- $this->strict_mode = ($mode) ? GESHI_ALWAYS : GESHI_NEVER;
- }
- }
- /**
- * Disables all highlighting
- *
- * @since 1.0.0
- * @todo Rewrite with array traversal
- * @deprecated In favour of enable_highlighting
- */
- function disable_highlighting() {
- $this->enable_highlighting(false);
- }
- /**
- * Enables all highlighting
- *
- * The optional flag parameter was added in version 1.0.7.21 and can be used
- * to enable (true) or disable (false) all highlighting.
- *
- * @since 1.0.0
- * @param boolean A flag specifying whether to enable or disable all highlighting
- * @todo Rewrite with array traversal
- */
- function enable_highlighting($flag = true) {
- $flag = $flag ? true : false;
- foreach ($this->lexic_permissions as $key => $value) {
- if (is_array($value)) {
- foreach ($value as $k => $v) {
- $this->lexic_permissions[$key][$k] = $flag;
- }
- } else {
- $this->lexic_permissions[$key] = $flag;
- }
- }
- // Context blocks
- $this->enable_important_blocks = $flag;
- }
- /**
- * Given a file extension, this method returns either a valid geshi language
- * name, or the empty string if it couldn't be found
- *
- * @param string The extension to get a language name for
- * @param array A lookup array to use instead of the default one
- * @since 1.0.5
- * @todo Re-think about how this method works (maybe make it private and/or make it
- * a extension->lang lookup?)
- * @todo static?
- */
- function get_language_name_from_extension( $extension, $lookup = array() ) {
- if ( !is_array($lookup) || empty($lookup)) {
- $lookup = array(
- '6502acme' => array( 'a', 's', 'asm', 'inc' ),
- '6502tasm' => array( 'a', 's', 'asm', 'inc' ),
- '6502kickass' => array( 'a', 's', 'asm', 'inc' ),
- '68000devpac' => array( 'a', 's', 'asm', 'inc' ),
- 'abap' => array('abap'),
- 'actionscript' => array('as'),
- 'ada' => array('a', 'ada', 'adb', 'ads'),
- 'apache' => array('conf'),
- 'asm' => array('ash', 'asm', 'inc'),
- 'asp' => array('asp'),
- 'bash' => array('sh'),
- 'bf' => array('bf'),
- 'c' => array('c', 'h'),
- 'c_mac' => array('c', 'h'),
- 'caddcl' => array(),
- 'cadlisp' => array(),
- 'cdfg' => array('cdfg'),
- 'cobol' => array('cbl'),
- 'cpp' => array('cpp', 'hpp', 'C', 'H', 'CPP', 'HPP'),
- 'csharp' => array('cs'),
- 'css' => array('css'),
- 'd' => array('d'),
- 'delphi' => array('dpk', 'dpr', 'pp', 'pas'),
- 'diff' => array('diff', 'patch'),
- 'dos' => array('bat', 'cmd'),
- 'gdb' => array('kcrash', 'crash', 'bt'),
- 'gettext' => array('po', 'pot'),
- 'gml' => array('gml'),
- 'gnuplot' => array('plt'),
- 'groovy' => array('groovy'),
- 'haskell' => array('hs'),
- 'html4strict' => array('html', 'htm'),
- 'ini' => array('ini', 'desktop'),
- 'java' => array('java'),
- 'javascript' => array('js'),
- 'klonec' => array('kl1'),
- 'klonecpp' => array('klx'),
- 'latex' => array('tex'),
- 'lisp' => array('lisp'),
- 'lua' => array('lua'),
- 'matlab' => array('m'),
- 'mpasm' => array(),
- 'mysql' => array('sql'),
- 'nsis' => array(),
- 'objc' => array(),
- 'oobas' => array(),
- 'oracle8' => array(),
- 'oracle10' => array(),
- 'pascal' => array('pas'),
- 'perl' => array('pl', 'pm'),
- 'php' => array('php', 'php5', 'phtml', 'phps'),
- 'povray' => array('pov'),
- 'providex' => array('pvc', 'pvx'),
- 'prolog' => array('pl'),
- 'python' => array('py'),
- 'qbasic' => array('bi'),
- 'reg' => array('reg'),
- 'ruby' => array('rb'),
- 'sas' => array('sas'),
- 'scala' => array('scala'),
- 'scheme' => array('scm'),
- 'scilab' => array('sci'),
- 'smalltalk' => array('st'),
- 'smarty' => array(),
- 'tcl' => array('tcl'),
- 'vb' => array('bas'),
- 'vbnet' => array(),
- 'visualfoxpro' => array(),
- 'whitespace' => array('ws'),
- 'xml' => array('xml', 'svg', 'xrc'),
- 'z80' => array('z80', 'asm', 'inc')
- );
- }
- foreach ($lookup as $lang => $extensions) {
- if (in_array($extension, $extensions)) {
- return $lang;
- }
- }
- return '';
- }
- /**
- * Given a file name, this method loads its contents in, and attempts
- * to set the language automatically. An optional lookup table can be
- * passed for looking up the language name. If not specified a default
- * table is used
- *
- * The language table is in the form
- * <pre>array(
- * 'lang_name' => array('extension', 'extension', ...),
- * 'lang_name' ...
- * );</pre>
- *
- * @param string The filename to load the source from
- * @param array A lookup array to use instead of the default one
- * @todo Complete rethink of this and above method
- * @since 1.0.5
- */
- function load_from_file($file_name, $lookup = array()) {
- if (is_readable($file_name)) {
- $this->set_source(file_get_contents($file_name));
- $this->set_language($this->get_language_name_from_extension(substr(strrchr($file_name, '.'), 1), $lookup));
- } else {
- $this->error = GESHI_ERROR_FILE_NOT_READABLE;
- }
- }
- /**
- * Adds a keyword to a keyword group for highlighting
- *
- * @param int The key of the keyword group to add the keyword to
- * @param string The word to add to the keyword group
- * @since 1.0.0
- */
- function add_keyword($key, $word) {
- if (!in_array($word, $this->language_data['KEYWORDS'][$key])) {
- $this->language_data['KEYWORDS'][$key][] = $word;
- //NEW in 1.0.8 don't recompile the whole optimized regexp, simply append it
- if ($this->parse_cache_built) {
- $subkey = count($this->language_data['CACHED_KEYWORD_LISTS'][$key]) - 1;
- $this->language_data['CACHED_KEYWORD_LISTS'][$key][$subkey] .= '|' . preg_quote($word, '/');
- }
- }
- }
- /**
- * Removes a keyword from a keyword group
- *
- * @param int The key of the keyword group to remove the keyword from
- * @param string The word to remove from the keyword group
- * @param bool Wether to automatically recompile the optimized regexp list or not.
- * Note: if you set this to false and @see GeSHi->parse_code() was already called once,
- * for the current language, you have to manually call @see GeSHi->optimize_keyword_group()
- * or the removed keyword will stay in cache and still be highlighted! On the other hand
- * it might be too expensive to recompile the regexp list for every removal if you want to
- * remove a lot of keywords.
- * @since 1.0.0
- */
- function remove_keyword($key, $word, $recompile = true) {
- $key_to_remove = array_search($word, $this->language_data['KEYWORDS'][$key]);
- if ($key_to_remove !== false) {
- unset($this->language_data['KEYWORDS'][$key][$key_to_remove]);
- //NEW in 1.0.8, optionally recompile keyword group
- if ($recompile && $this->parse_cache_built) {
- $this->optimize_keyword_group($key);
- }
- }
- }
- /**
- * Creates a new keyword group
- *
- * @param int The key of the keyword group to create
- * @param string The styles for the keyword group
- * @param boolean Whether the keyword group is case sensitive ornot
- * @param array The words to use for the keyword group
- * @since 1.0.0
- */
- function add_keyword_group($key, $styles, $case_sensitive = true, $words = array()) {
- $words = (array) $words;
- if (empty($words)) {
- // empty word lists mess up highlighting
- return false;
- }
- //Add the new keyword group internally
- $this->language_data['KEYWORDS'][$key] = $words;
- $this->lexic_permissions['KEYWORDS'][$key] = true;
- $this->language_data['CASE_SENSITIVE'][$key] = $case_sensitive;
- $this->language_data['STYLES']['KEYWORDS'][$key] = $styles;
- //NEW in 1.0.8, cache keyword regexp
- if ($this->parse_cache_built) {
- $this->optimize_keyword_group($key);
- }
- }
- /**
- * Removes a keyword group
- *
- * @param int The key of the keyword group to remove
- * @since 1.0.0
- */
- function remove_keyword_group ($key) {
- //Remove the keyword group internally
- unset($this->language_data['KEYWORDS'][$key]);
- unset($this->lexic_permissions['KEYWORDS'][$key]);
- unset($this->language_data['CASE_SENSITIVE'][$key]);
- unset($this->language_data['STYLES']['KEYWORDS'][$key]);
- //NEW in 1.0.8
- unset($this->language_data['CACHED_KEYWORD_LISTS'][$key]);
- }
- /**
- * compile optimized regexp list for keyword group
- *
- * @param int The key of the keyword group to compile & optimize
- * @since 1.0.8
- */
- function optimize_keyword_group($key) {
- $this->language_data['CACHED_KEYWORD_LISTS'][$key] =
- $this->optimize_regexp_list($this->language_data['KEYWORDS'][$key]);
- $space_as_whitespace = false;
- if(isset($this->language_data['PARSER_CONTROL'])) {
- if(isset($this->language_data['PARSER_CONTROL']['KEYWORDS'])) {
- if(isset($this->language_data['PARSER_CONTROL']['KEYWORDS']['SPACE_AS_WHITESPACE'])) {
- $space_as_whitespace = $this->language_data['PARSER_CONTROL']['KEYWORDS']['SPACE_AS_WHITESPACE'];
- }
- if(isset($this->language_data['PARSER_CONTROL']['KEYWORDS'][$key]['SPACE_AS_WHITESPACE'])) {
- if(isset($this->language_data['PARSER_CONTROL']['KEYWORDS'][$key]['SPACE_AS_WHITESPACE'])) {
- $space_as_whitespace = $this->language_data['PARSER_CONTROL']['KEYWORDS'][$key]['SPACE_AS_WHITESPACE'];
- }
- }
- }
- }
- if($space_as_whitespace) {
- foreach($this->language_data['CACHED_KEYWORD_LISTS'][$key] as $rxk => $rxv) {
- $this->language_data['CACHED_KEYWORD_LISTS'][$key][$rxk] =
- str_replace(" ", "\\s+", $rxv);
- }
- }
- }
- /**
- * Sets the content of the header block
- *
- * @param string The content of the header block
- * @since 1.0.2
- */
- function set_header_content($content) {
- $this->header_content = $content;
- }
- /**
- * Sets the content of the footer block
- *
- * @param string The content of the footer block
- * @since 1.0.2
- */
- function set_footer_content($content) {
- $this->footer_content = $content;
- }
- /**
- * Sets the style for the header content
- *
- * @param string The style for the header content
- * @since 1.0.2
- */
- function set_header_content_style($style) {
- $this->header_content_style = $style;
- }
- /**
- * Sets the style for the footer content
- *
- * @param string The style for the footer content
- * @since 1.0.2
- */
- function set_footer_content_style($style) {
- $this->footer_content_style = $style;
- }
- /**
- * Sets whether to force a surrounding block around
- * the highlighted code or not
- *
- * @param boolean Tells whether to enable or disable this feature
- * @since 1.0.7.20
- */
- function enable_inner_code_block($flag) {
- $this->force_code_block = (bool)$flag;
- }
- /**
- * Sets the base URL to be used for keywords
- *
- * @param int The key of the keyword group to set the URL for
- * @param string The URL to set for the group. If {FNAME} is in
- * the url somewhere, it is replaced by the keyword
- * that the URL is being made for
- * @since 1.0.2
- */
- function set_url_for_keyword_group($group, $url) {
- $this->language_data['URLS'][$group] = $url;
- }
- /**
- * Sets styles for links in code
- *
- * @param int A constant that specifies what state the style is being
- * set for - e.g. :hover or :visited
- * @param string The styles to use for that state
- * @since 1.0.2
- */
- function set_link_styles($type, $styles) {
- $this->link_styles[$type] = $styles;
- }
- /**
- * Sets the target for links in code
- *
- * @param string The target for links in the code, e.g. _blank
- * @since 1.0.3
- */
- function set_link_target($target) {
- if (!$target) {
- $this->link_target = '';
- } else {
- $this->link_target = ' target="' . $target . '"';
- }
- }
- /**
- * Sets styles for important parts of the code
- *
- * @param string The styles to use on important parts of the code
- * @since 1.0.2
- */
- function set_important_styles($styles) {
- $this->important_styles = $styles;
- }
- /**
- * Sets whether context-important blocks are highlighted
- *
- * @param boolean Tells whether to enable or disable highlighting of important blocks
- * @todo REMOVE THIS SHIZ FROM GESHI!
- * @deprecated
- * @since 1.0.2
- */
- function enable_important_blocks($flag) {
- $this->enable_important_blocks = ( $flag ) ? true : false;
- }
- /**
- * Whether CSS IDs should be added to each line
- *
- * @param boolean If true, IDs will be added to each line.
- * @since 1.0.2
- */
- function enable_ids($flag = true) {
- $this->add_ids = ($flag) ? true : false;
- }
- /**
- * Specifies which lines to highlight extra
- *
- * The extra style parameter was added in 1.0.7.21.
- *
- * @param mixed An array of line numbers to highlight, or just a line
- * number on its own.
- * @param string A string specifying the style to use for this line.
- * If null is specified, the default style is used.
- * If false is specified, the line will be removed from
- * special highlighting
- * @since 1.0.2
- * @todo Some data replication here that could be cut down on
- */
- function highlight_lines_extra($lines, $style = null) {
- if (is_array($lines)) {
- //Split up the job using single lines at a time
- foreach ($lines as $line) {
- $this->highlight_lines_extra($line, $style);
- }
- } else {
- //Mark the line as being highlighted specially
- $lines = intval($lines);
- $this->highlight_extra_lines[$lines] = $lines;
- //Decide on which style to use
- if ($style === null) { //Check if we should use default style
- unset($this->highlight_extra_lines_styles[$lines]);
- } else if ($style === false) { //Check if to remove this line
- unset($this->highlight_extra_lines[$lines]);
- unset($this->highlight_extra_lines_styles[$lines]);
- } else {
- $this->highlight_extra_lines_styles[$lines] = $style;
- }
- }
- }
- /**
- * Sets the style for extra-highlighted lines
- *
- * @param string The style for extra-highlighted lines
- * @since 1.0.2
- */
- function set_highlight_lines_extra_style($styles) {
- $this->highlight_extra_lines_style = $styles;
- }
- /**
- * Sets the line-ending
- *
- * @param string The new line-ending
- * @since 1.0.2
- */
- function set_line_ending($line_ending) {
- $this->line_ending = (string)$line_ending;
- }
- /**
- * Sets what number line numbers should start at. Should
- * be a positive integer, and will be converted to one.
- *
- * <b>Warning:</b> Using this method will add the "start"
- * attribute to the <ol> that is used for line numbering.
- * This is <b>not</b> valid XHTML strict, so if that's what you
- * care about then don't use this method. Firefox is getting
- * support for the CSS method of doing this in 1.1 and Opera
- * has support for the CSS method, but (of course) IE doesn't
- * so it's not worth doing it the CSS way yet.
- *
- * @param int The number to start line numbers at
- * @since 1.0.2
- */
- function start_line_numbers_at($number) {
- $this->line_numbers_start = abs(intval($number));
- }
- /**
- * Sets the encoding used for htmlspecialchars(), for international
- * support.
- *
- * NOTE: This is not needed for now because htmlspecialchars() is not
- * being used (it has a security hole in PHP4 that has not been patched).
- * Maybe in a future version it may make a return for speed reasons, but
- * I doubt it.
- *
- * @param string The encoding to use for the source
- * @since 1.0.3
- */
- function set_encoding($encoding) {
- if ($encoding) {
- $this->encoding = strtolower($encoding);
- }
- }
- /**
- * Turns linking of keywords on or off.
- *
- * @param boolean If true, links will be added to keywords
- * @since 1.0.2
- */
- function enable_keyword_links($enable = true) {
- $this->keyword_links = (bool) $enable;
- }
- /**
- * Setup caches needed for styling. This is automatically called in
- * parse_code() and get_stylesheet() when appropriate. This function helps
- * stylesheet generators as they rely on some style information being
- * preprocessed
- *
- * @since 1.0.8
- * @access private
- */
- function build_style_cache() {
- //Build the style cache needed to highlight numbers appropriate
- if($this->lexic_permissions['NUMBERS']) {
- //First check what way highlighting information for numbers are given
- if(!isset($this->language_data['NUMBERS'])) {
- $this->language_data['NUMBERS'] = 0;
- }
- if(is_array($this->language_data['NUMBERS'])) {
- $this->language_data['NUMBERS_CACHE'] = $this->language_data['NUMBERS'];
- } else {
- $this->language_data['NUMBERS_CACHE'] = array();
- if(!$this->language_data['NUMBERS']) {
- $this->language_data['NUMBERS'] =
- GESHI_NUMBER_INT_BASIC |
- GESHI_NUMBER_FLT_NONSCI;
- }
- for($i = 0, $j = $this->language_data['NUMBERS']; $j > 0; ++$i, $j>>=1) {
- //Rearrange style indices if required ...
- if(isset($this->language_data['STYLES']['NUMBERS'][1<<$i])) {
- $this->language_data['STYLES']['NUMBERS'][$i] =
- $this->language_data['STYLES']['NUMBERS'][1<<$i];
- unset($this->language_data['STYLES']['NUMBERS'][1<<$i]);
- }
- //Check if this bit is set for highlighting
- if($j&1) {
- //So this bit is set ...
- //Check if it belongs to group 0 or the actual stylegroup
- if(isset($this->language_data['STYLES']['NUMBERS'][$i])) {
- $this->language_data['NUMBERS_CACHE'][$i] = 1 << $i;
- } else {
- if(!isset($this->language_data['NUMBERS_CACHE'][0])) {
- $this->language_data['NUMBERS_CACHE'][0] = 0;
- }
- $this->language_data['NUMBERS_CACHE'][0] |= 1 << $i;
- }
- }
- }
- }
- }
- }
- /**
- * Setup caches needed for parsing. This is automatically called in parse_code() when appropriate.
- * This function makes stylesheet generators much faster as they do not need these caches.
- *
- * @since 1.0.8
- * @access private
- */
- function build_parse_cache() {
- // cache symbol regexp
- //As this is a costy operation, we avoid doing it for multiple groups ...
- //Instead we perform it for all symbols at once.
- //
- //For this to work, we need to reorganize the data arrays.
- if ($this->lexic_permissions['SYMBOLS'] && !empty($this->language_data['SYMBOLS'])) {
- $this->language_data['MULTIPLE_SYMBOL_GROUPS'] = count($this->language_data['STYLES']['SYMBOLS']) > 1;
- $this->language_data['SYMBOL_DATA'] = array();
- $symbol_preg_multi = array(); // multi char symbols
- $symbol_preg_single = array(); // single char symbols
- foreach ($this->language_data['SYMBOLS'] as $key => $symbols) {
- if (is_array($symbols)) {
- foreach ($symbols as $sym) {
- $sym = $this->hsc($sym);
- if (!isset($this->language_data['SYMBOL_DATA'][$sym])) {
- $this->language_data['SYMBOL_DATA'][$sym] = $key;
- if (isset($sym[1])) { // multiple chars
- $symbol_preg_multi[] = preg_quote($sym, '/');
- } else { // single char
- if ($sym == '-') {
- // don't trigger range out of order error
- $symbol_preg_single[] = '\-';
- } else {
- $symbol_preg_single[] = preg_quote($sym, '/');
- }
- }
- }
- }
- } else {
- $symbols = $this->hsc($symbols);
- if (!isset($this->language_data['SYMBOL_DATA'][$symbols])) {
- $this->language_data['SYMBOL_DATA'][$symbols] = 0;
- if (isset($symbols[1])) { // multiple chars
- $symbol_preg_multi[] = preg_quote($symbols, '/');
- } else if ($symbols == '-') {
- // don't trigger range out of order error
- $symbol_preg_single[] = '\-';
- } else { // single char
- $symbol_preg_single[] = preg_quote($symbols, '/');
- }
- }
- }
- }
- //Now we have an array with each possible symbol as the key and the style as the actual data.
- //This way we can set the correct style just the moment we highlight ...
- //
- //Now we need to rewrite our array to get a search string that
- $symbol_preg = array();
- if (!empty($symbol_preg_multi)) {
- rsort($symbol_preg_multi);
- $symbol_preg[] = implode('|', $symbol_preg_multi);
- }
- if (!empty($symbol_preg_single)) {
- rsort($symbol_preg_single);
- $symbol_preg[] = '[' . implode('', $symbol_preg_single) . ']';
- }
- $this->language_data['SYMBOL_SEARCH'] = implode("|", $symbol_preg);
- }
- // cache optimized regexp for keyword matching
- // remove old cache
- $this->language_data['CACHED_KEYWORD_LISTS'] = array();
- foreach (array_keys($this->language_data['KEYWORDS']) as $key) {
- if (!isset($this->lexic_permissions['KEYWORDS'][$key]) ||
- $this->lexic_permissions['KEYWORDS'][$key]) {
- $this->optimize_keyword_group($key);
- }
- }
- // brackets
- if ($this->lexic_permissions['BRACKETS']) {
- $this->language_data['CACHE_BRACKET_MATCH'] = array('[', ']', '(', ')', '{', '}');
- if (!$this->use_classes && isset($this->language_data['STYLES']['BRACKETS'][0])) {
- $this->language_data['CACHE_BRACKET_REPLACE'] = array(
- '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">[|>',
- '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">]|>',
- '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">(|>',
- '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">)|>',
- '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">{|>',
- '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">}|>',
- );
- }
- else {
- $this->language_data['CACHE_BRACKET_REPLACE'] = array(
- '<| class="br0">[|>',
- '<| class="br0">]|>',
- '<| class="br0">(|>',
- '<| class="br0">)|>',
- '<| class="br0">{|>',
- '<| class="br0">}|>',
- );
- }
- }
- //Build the parse cache needed to highlight numbers appropriate
- if($this->lexic_permissions['NUMBERS']) {
- //Check if the style rearrangements have been processed ...
- //This also does some preprocessing to check which style groups are useable ...
- if(!isset($this->language_data['NUMBERS_CACHE'])) {
- $this->build_style_cache();
- }
- //Number format specification
- //All this formats are matched case-insensitively!
- static $numbers_format = array(
- GESHI_NUMBER_INT_BASIC =>
- '(?:(?<![0-9a-z_\.%$@])|(?<=\.\.))(?<![\d\.]e[+\-])([1-9]\d*?|0)(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_INT_CSTYLE =>
- '(?<![0-9a-z_\.%])(?<![\d\.]e[+\-])([1-9]\d*?|0)l(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_BIN_SUFFIX =>
- '(?<![0-9a-z_\.])(?<![\d\.]e[+\-])[01]+?[bB](?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_BIN_PREFIX_PERCENT =>
- '(?<![0-9a-z_\.%])(?<![\d\.]e[+\-])%[01]+?(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_BIN_PREFIX_0B =>
- '(?<![0-9a-z_\.%])(?<![\d\.]e[+\-])0b[01]+?(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_OCT_PREFIX =>
- '(?<![0-9a-z_\.])(?<![\d\.]e[+\-])0[0-7]+?(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_OCT_PREFIX_0O =>
- '(?<![0-9a-z_\.%])(?<![\d\.]e[+\-])0o[0-7]+?(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_OCT_PREFIX_AT =>
- '(?<![0-9a-z_\.%])(?<![\d\.]e[+\-])\@[0-7]+?(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_OCT_SUFFIX =>
- '(?<![0-9a-z_\.])(?<![\d\.]e[+\-])[0-7]+?o(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_HEX_PREFIX =>
- '(?<![0-9a-z_\.])(?<![\d\.]e[+\-])0x[0-9a-fA-F]+?(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_HEX_PREFIX_DOLLAR =>
- '(?<![0-9a-z_\.])(?<![\d\.]e[+\-])\$[0-9a-fA-F]+?(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_HEX_SUFFIX =>
- '(?<![0-9a-z_\.])(?<![\d\.]e[+\-])\d[0-9a-fA-F]*?[hH](?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_FLT_NONSCI =>
- '(?<![0-9a-z_\.])(?<![\d\.]e[+\-])\d+?\.\d+?(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_FLT_NONSCI_F =>
- '(?<![0-9a-z_\.])(?<![\d\.]e[+\-])(?:\d+?(?:\.\d*?)?|\.\d+?)f(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_FLT_SCI_SHORT =>
- '(?<![0-9a-z_\.])(?<![\d\.]e[+\-])\.\d+?(?:e[+\-]?\d+?)?(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)',
- GESHI_NUMBER_FLT_SCI_ZERO =>
- '(?<![0-9a-z_\.])(?<![\d\.]e[+\-])(?:\d+?(?:\.\d*?)?|\.\d+?)(?:e[+\-]?\d+?)?(?![0-9a-z]|\.(?:[eE][+\-]?)?\d)'
- );
- //At this step we have an associative array with flag groups for a
- //specific style or an string denoting a regexp given its index.
- $this->language_data['NUMBERS_RXCACHE'] = array();
- foreach($this->language_data['NUMBERS_CACHE'] as $key => $rxdata) {
- if(is_string($rxdata)) {
- $regexp = $rxdata;
- } else {
- //This is a bitfield of number flags to highlight:
- //Build an array, implode them together and make this the actual RX
- $rxuse = array();
- for($i = 1; $i <= $rxdata; $i<<=1) {
- if($rxdata & $i) {
- $rxuse[] = $numbers_format[$i];
- }
- }
- $regexp = implode("|", $rxuse);
- }
- $this->language_data['NUMBERS_RXCACHE'][$key] =
- "/(?<!<\|\/)(?<!<\|!REG3XP)(?<!<\|\/NUM!)(?<!\d\/>)($regexp)(?!(?:<DOT>|(?>[^\<]))+>)(?![^<]*>)(?!\|>)(?!\/>)/i"; //
- }
- if(!isset($this->language_data['PARSER_CONTROL']['NUMBERS']['PRECHECK_RX'])) {
- $this->language_data['PARSER_CONTROL']['NUMBERS']['PRECHECK_RX'] = '#\d#';
- }
- }
- $this->parse_cache_built = true;
- }
- /**
- * Returns the code in $this->source, highlighted and surrounded by the
- * nessecary HTML.
- *
- * This should only be called ONCE, cos it's SLOW! If you want to highlight
- * the same source multiple times, you're better off doing a whole lot of
- * str_replaces to replace the <span>s
- *
- * @since 1.0.0
- */
- function parse_code () {
- // Start the timer
- $start_time = microtime();
- // Replace all newlines to a common form.
- $code = str_replace("\r\n", "\n", $this->source);
- $code = str_replace("\r", "\n", $code);
- // Firstly, if there is an error, we won't highlight
- if ($this->error) {
- //Escape the source for output
- $result = $this->hsc($this->source);
- //This fix is related to SF#1923020, but has to be applied regardless of
- //actually highlighting symbols.
- $result = str_replace(array('<SEMI>', '<PIPE>'), array(';', '|'), $result);
- // Timing is irrelevant
- $this->set_time($start_time, $start_time);
- $this->finalise($result);
- return $result;
- }
- // make sure the parse cache is up2date
- if (!$this->parse_cache_built) {
- $this->build_parse_cache();
- }
- // Initialise various stuff
- $length = strlen($code);
- $COMMENT_MATCHED = false;
- $stuff_to_parse = '';
- $endresult = '';
- // "Important" selections are handled like multiline comments
- // @todo GET RID OF THIS SHIZ
- if ($this->enable_important_blocks) {
- $this->language_data['COMMENT_MULTI'][GESHI_START_IMPORTANT] = GESHI_END_IMPORTANT;
- }
- if ($this->strict_mode) {
- // Break the source into bits. Each bit will be a portion of the code
- // within script delimiters - for example, HTML between < and >
- $k = 0;
- $parts = array();
- $matches = array();
- $next_match_pointer = null;
- // we use a copy to unset delimiters on demand (when they are not found)
- $delim_copy = $this->language_data['SCRIPT_DELIMITERS'];
- $i = 0;
- while ($i < $length) {
- $next_match_pos = $length + 1; // never true
- foreach ($delim_copy as $dk => $delimiters) {
- if(is_array($delimiters)) {
- foreach ($delimiters as $open => $close) {
- // make sure the cache is setup properly
- if (!isset($matches[$dk][$open])) {
- $matches[$dk][$open] = array(
- 'next_match' => -1,
- 'dk' => $dk,
- 'open' => $open, // needed for grouping of adjacent code blocks (see below)
- 'open_strlen' => strlen($open),
- 'close' => $close,
- 'close_strlen' => strlen($close),
- );
- }
- // Get the next little bit for this opening string
- if ($matches[$dk][$open]['next_match'] < $i) {
- // only find the next pos if it was not already cached
- $open_pos = strpos($code, $open, $i);
- if ($open_pos === false) {
- // no match for this delimiter ever
- unset($delim_copy[$dk][$open]);
- continue;
- }
- $matches[$dk][$open]['next_match'] = $open_pos;
- }
- if ($matches[$dk][$open]['next_match'] < $next_match_pos) {
- //So we got a new match, update the close_pos
- $matches[$dk][$open]['close_pos'] =
- strpos($code, $close, $matches[$dk][$open]['next_match']+1);
- $next_match_pointer =& $matches[$dk][$open];
- $next_match_pos = $matches[$dk][$open]['next_match'];
- }
- }
- } else {
- //So we should match an RegExp as Strict Block ...
- /**
- * The value in $delimiters is expected to be an RegExp
- * containing exactly 2 matching groups:
- * - Group 1 is the opener
- * - Group 2 is the closer
- */
- if(!GESHI_PHP_PRE_433 && //Needs proper rewrite to work with PHP >=4.3.0; 4.3.3 is guaranteed to work.
- preg_match($delimiters, $code, $matches_rx, PREG_OFFSET_CAPTURE, $i)) {
- //We got a match ...
- if(isset($matches_rx['start']) && isset($matches_rx['end']))
- {
- $matches[$dk] = array(
- 'next_match' => $matches_rx['start'][1],
- 'dk' => $dk,
- 'close_strlen' => strlen($matches_rx['end'][0]),
- 'close_pos' => $matches_rx['end'][1],
- );
- } else {
- $matches[$dk] = array(
- 'next_match' => $matches_rx[1][1],
- 'dk' => $dk,
- 'close_strlen' => strlen($matches_rx[2][0]),
- 'close_pos' => $matches_rx[2][1],
- );
- }
- } else {
- // no match for this delimiter ever
- unset($delim_copy[$dk]);
- continue;
- }
- if ($matches[$dk]['next_match'] <= $next_match_pos) {
- $next_match_pointer =& $matches[$dk];
- $next_match_pos = $matches[$dk]['next_match'];
- }
- }
- }
- // non-highlightable text
- $parts[$k] = array(
- 1 => substr($code, $i, $next_match_pos - $i)
- );
- ++$k;
- if ($next_match_pos > $length) {
- // out of bounds means no next match was found
- break;
- }
- // highlightable code
- $parts[$k][0] = $next_match_pointer['dk'];
- //Only combine for non-rx script blocks
- if(is_array($delim_copy[$next_match_pointer['dk']])) {
- // group adjacent script blocks, e.g. <foobar><asdf> should be one block, not three!
- $i = $next_match_pos + $next_match_pointer['open_strlen'];
- while (true) {
- $close_pos = strpos($code, $next_match_pointer['close'], $i);
- if ($close_pos == false) {
- break;
- }
- $i = $close_pos + $next_match_pointer['close_strlen'];
- if ($i == $length) {
- break;
- }
- if ($code[$i] == $next_match_pointer['open'][0] && ($next_match_pointer['open_strlen'] == 1 ||
- substr($code, $i, $next_match_pointer['open_strlen']) == $next_match_pointer['open'])) {
- // merge adjacent but make sure we don't merge things like <tag><!-- comment -->
- foreach ($matches as $submatches) {
- foreach ($submatches as $match) {
- if ($match['next_match'] == $i) {
- // a different block already matches here!
- break 3;
- }
- }
- }
- } else {
- break;
- }
- }
- } else {
- $close_pos = $next_match_pointer['close_pos'] + $next_match_pointer['close_strlen'];
- $i = $close_pos;
- }
- if ($close_pos === false) {
- // no closing delimiter found!
- $parts[$k][1] = substr($code, $next_match_pos);
- ++$k;
- break;
- } else {
- $parts[$k][1] = substr($code, $next_match_pos, $i - $next_match_pos);
- ++$k;
- }
- }
- unset($delim_copy, $next_match_pointer, $next_match_pos, $matches);
- $num_parts = $k;
- if ($num_parts == 1 && $this->strict_mode == GESHI_MAYBE) {
- // when we have only one part, we don't have anything to highlight at all.
- // if we have a "maybe" strict language, this should be handled as highlightable code
- $parts = array(
- 0 => array(
- 0 => '',
- 1 => ''
- ),
- 1 => array(
- 0 => null,
- 1 => $parts[0][1]
- )
- );
- $num_parts = 2;
- }
- } else {
- // Not strict mode - simply dump the source into
- // the array at index 1 (the first highlightable block)
- $parts = array(
- 0 => array(
- 0 => '',
- 1 => ''
- ),
- 1 => array(
- 0 => null,
- 1 => $code
- )
- );
- $num_parts = 2;
- }
- //Unset variables we won't need any longer
- unset($code);
- //Preload some repeatedly used values regarding hardquotes ...
- $hq = isset($this->language_data['HARDQUOTE']) ? $this->language_data['HARDQUOTE'][0] : false;
- $hq_strlen = strlen($hq);
- //Preload if line numbers are to be generated afterwards
- //Added a check if line breaks should be forced even without line numbers, fixes SF#1727398
- $check_linenumbers = $this->line_numbers != GESHI_NO_LINE_NUMBERS ||
- !empty($this->highlight_extra_lines) || !$this->allow_multiline_span;
- //preload the escape char for faster checking ...
- $escaped_escape_char = $this->hsc($this->language_data['ESCAPE_CHAR']);
- // this is used for single-line comments
- $sc_disallowed_before = "";
- $sc_disallowed_after = "";
- if (isset($this->language_data['PARSER_CONTROL'])) {
- if (isset($this->language_data['PARSER_CONTROL']['COMMENTS'])) {
- if (isset($this->language_data['PARSER_CONTROL']['COMMENTS']['DISALLOWED_BEFORE'])) {
- $sc_disallowed_before = $this->language_data['PARSER_CONTROL']['COMMENTS']['DISALLOWED_BEFORE'];
- }
- if (isset($this->language_data['PARSER_CONTROL']['COMMENTS']['DISALLOWED_AFTER'])) {
- $sc_disallowed_after = $this->language_data['PARSER_CONTROL']['COMMENTS']['DISALLOWED_AFTER'];
- }
- }
- }
- //Fix for SF#1932083: Multichar Quotemarks unsupported
- $is_string_starter = array();
- if ($this->lexic_permissions['STRINGS']) {
- foreach ($this->language_data['QUOTEMARKS'] as $quotemark) {
- if (!isset($is_string_starter[$quotemark[0]])) {
- $is_string_starter[$quotemark[0]] = (string)$quotemark;
- } else if (is_string($is_string_starter[$quotemark[0]])) {
- $is_string_starter[$quotemark[0]] = array(
- $is_string_starter[$quotemark[0]],
- $quotemark);
- } else {
- $is_string_starter[$quotemark[0]][] = $quotemark;
- }
- }
- }
- // Now we go through each part. We know that even-indexed parts are
- // code that shouldn't be highlighted, and odd-indexed parts should
- // be highlighted
- for ($key = 0; $key < $num_parts; ++$key) {
- $STRICTATTRS = '';
- // If this block should be highlighted...
- if (!($key & 1)) {
- // Else not a block to highlight
- $endresult .= $this->hsc($parts[$key][1]);
- unset($parts[$key]);
- continue;
- }
- $result = '';
- $part = $parts[$key][1];
- $highlight_part = true;
- if ($this->strict_mode && !is_null($parts[$key][0])) {
- // get the class key for this block of code
- $script_key = $parts[$key][0];
- $highlight_part = $this->language_data['HIGHLIGHT_STRICT_BLOCK'][$script_key];
- if ($this->language_data['STYLES']['SCRIPT'][$script_key] != '' &&
- $this->lexic_permissions['SCRIPT']) {
- // Add a span element around the source to
- // highlight the overall source block
- if (!$this->use_classes &&
- $this->language_data['STYLES']['SCRIPT'][$script_key] != '') {
- $attributes = ' style="' . $this->language_data['STYLES']['SCRIPT'][$script_key] . '"';
- } else {
- $attributes = ' class="sc' . $script_key . '"';
- }
- $result .= "<span$attributes>";
- $STRICTATTRS = $attributes;
- }
- }
- if ($highlight_part) {
- // Now, highlight the code in this block. This code
- // is really the engine of GeSHi (along with the method
- // parse_non_string_part).
- // cache comment regexps incrementally
- $next_comment_regexp_key = '';
- $next_comment_regexp_pos = -1;
- $next_comment_multi_pos = -1;
- $next_comment_single_pos = -1;
- $comment_regexp_cache_per_key = array();
- $comment_multi_cache_per_key = array();
- $comment_single_cache_per_key = array();
- $next_open_comment_multi = '';
- $next_comment_single_key = '';
- $escape_regexp_cache_per_key = array();
- $next_escape_regexp_key = '';
- $next_escape_regexp_pos = -1;
- $length = strlen($part);
- for ($i = 0; $i < $length; ++$i) {
- // Get the next char
- $char = $part[$i];
- $char_len = 1;
- // update regexp comment cache if needed
- if (isset($this->language_data['COMMENT_REGEXP']) && $next_comment_regexp_pos < $i) {
- $next_comment_regexp_pos = $length;
- foreach ($this->language_data['COMMENT_REGEXP'] as $comment_key => $regexp) {
- $match_i = false;
- if (isset($comment_regexp_cache_per_key[$comment_key]) &&
- ($comment_regexp_cache_per_key[$comment_key]['pos'] >= $i ||
- $comment_regexp_cache_per_key[$comment_key]['pos'] === false)) {
- // we have already matched something
- if ($comment_regexp_cache_per_key[$comment_key]['pos'] === false) {
- // this comment is never matched
- continue;
- }
- $match_i = $comment_regexp_cache_per_key[$comment_key]['pos'];
- } else if (
- //This is to allow use of the offset parameter in preg_match and stay as compatible with older PHP versions as possible
- (GESHI_PHP_PRE_433 && preg_match($regexp, substr($part, $i), $match, PREG_OFFSET_CAPTURE)) ||
- (!GESHI_PHP_PRE_433 && preg_match($regexp, $part, $match, PREG_OFFSET_CAPTURE, $i))
- ) {
- $match_i = $match[0][1];
- if (GESHI_PHP_PRE_433) {
- $match_i += $i;
- }
- $comment_regexp_cache_per_key[$comment_key] = array(
- 'key' => $comment_key,
- 'length' => strlen($match[0][0]),
- 'pos' => $match_i
- );
- } else {
- $comment_regexp_cache_per_key[$comment_key]['pos'] = false;
- continue;
- }
- if ($match_i !== false && $match_i < $next_comment_regexp_pos) {
- $next_comment_regexp_pos = $match_i;
- $next_comment_regexp_key = $comment_key;
- if ($match_i === $i) {
- break;
- }
- }
- }
- }
- $string_started = false;
- if (isset($is_string_starter[$char])) {
- // Possibly the start of a new string ...
- //Check which starter it was ...
- //Fix for SF#1932083: Multichar Quotemarks unsupported
- if (is_array($is_string_starter[$char])) {
- $char_new = '';
- foreach ($is_string_starter[$char] as $testchar) {
- if ($testchar === substr($part, $i, strlen($testchar)) &&
- strlen($testchar) > strlen($char_new)) {
- $char_new = $testchar;
- $string_started = true;
- }
- }
- if ($string_started) {
- $char = $char_new;
- }
- } else {
- $testchar = $is_string_starter[$char];
- if ($testchar === substr($part, $i, strlen($testchar))) {
- $char = $testchar;
- $string_started = true;
- }
- }
- $char_len = strlen($char);
- }
- if ($string_started && ($i != $next_comment_regexp_pos)) {
- // Hand out the correct style information for this string
- $string_key = array_search($char, $this->language_data['QUOTEMARKS']);
- if (!isset($this->language_data['STYLES']['STRINGS'][$string_key]) ||
- !isset($this->language_data['STYLES']['ESCAPE_CHAR'][$string_key])) {
- $string_key = 0;
- }
- // parse the stuff before this
- $result .= $this->parse_non_string_part($stuff_to_parse);
- $stuff_to_parse = '';
- if (!$this->use_classes) {
- $string_attributes = ' style="' . $this->language_data['STYLES']['STRINGS'][$string_key] . '"';
- } else {
- $string_attributes = ' class="st'.$string_key.'"';
- }
- // now handle the string
- $string = "<span$string_attributes>" . GeSHi::hsc($char);
- $start = $i + $char_len;
- $string_open = true;
- if(empty($this->language_data['ESCAPE_REGEXP'])) {
- $next_escape_regexp_pos = $length;
- }
- do {
- //Get the regular ending pos ...
- $close_pos = strpos($part, $char, $start);
- if(false === $close_pos) {
- $close_pos = $length;
- }
- if($this->lexic_permissions['ESCAPE_CHAR']) {
- // update escape regexp cache if needed
- if (isset($this->language_data['ESCAPE_REGEXP']) && $next_escape_regexp_pos < $start) {
- $next_escape_regexp_pos = $length;
- foreach ($this->language_data['ESCAPE_REGEXP'] as $escape_key => $regexp) {
- $match_i = false;
- if (isset($escape_regexp_cache_per_key[$escape_key]) &&
- ($escape_regexp_cache_per_key[$escape_key]['pos'] >= $start ||
- $escape_regexp_cache_per_key[$escape_key]['pos'] === false)) {
- // we have already matched something
- if ($escape_regexp_cache_per_key[$escape_key]['pos'] === false) {
- // this comment is never matched
- continue;
- }
- $match_i = $escape_regexp_cache_per_key[$escape_key]['pos'];
- } else if (
- //This is to allow use of the offset parameter in preg_match and stay as compatible with older PHP versions as possible
- (GESHI_PHP_PRE_433 && preg_match($regexp, substr($part, $start), $match, PREG_OFFSET_CAPTURE)) ||
- (!GESHI_PHP_PRE_433 && preg_match($regexp, $part, $match, PREG_OFFSET_CAPTURE, $start))
- ) {
- $match_i = $match[0][1];
- if (GESHI_PHP_PRE_433) {
- $match_i += $start;
- }
- $escape_regexp_cache_per_key[$escape_key] = array(
- 'key' => $escape_key,
- 'length' => strlen($match[0][0]),
- 'pos' => $match_i
- );
- } else {
- $escape_regexp_cache_per_key[$escape_key]['pos'] = false;
- continue;
- }
- if ($match_i !== false && $match_i < $next_escape_regexp_pos) {
- $next_escape_regexp_pos = $match_i;
- $next_escape_regexp_key = $escape_key;
- if ($match_i === $start) {
- break;
- }
- }
- }
- }
- //Find the next simple escape position
- if('' != $this->language_data['ESCAPE_CHAR']) {
- $simple_escape = strpos($part, $this->language_data['ESCAPE_CHAR'], $start);
- if(false === $simple_escape) {
- $simple_escape = $length;
- }
- } else {
- $simple_escape = $length;
- }
- } else {
- $next_escape_regexp_pos = $length;
- $simple_escape = $length;
- }
- if($simple_escape < $next_escape_regexp_pos &&
- $simple_escape < $length &&
- $simple_escape < $close_pos) {
- //The nexxt escape sequence is a simple one ...
- $es_pos = $simple_escape;
- //Add the stuff not in the string yet ...
- $string .= $this->hsc(substr($part, $start, $es_pos - $start));
- //Get the style for this escaped char ...
- if (!$this->use_classes) {
- $escape_char_attributes = ' style="' . $this->language_data['STYLES']['ESCAPE_CHAR'][0] . '"';
- } else {
- $escape_char_attributes = ' class="es0"';
- }
- //Add the style for the escape char ...
- $string .= "<span$escape_char_attributes>" .
- GeSHi::hsc($this->language_data['ESCAPE_CHAR']);
- //Get the byte AFTER the ESCAPE_CHAR we just found
- $es_char = $part[$es_pos + 1];
- if ($es_char == "\n") {
- // don't put a newline around newlines
- $string .= "</span>\n";
- $start = $es_pos + 2;
- } else if (ord($es_char) >= 128) {
- //This is an non-ASCII char (UTF8 or single byte)
- //This code tries to work around SF#2037598 ...
- if(function_exists('mb_substr')) {
- $es_char_m = mb_substr(substr($part, $es_pos+1, 16), 0, 1, $this->encoding);
- $string .= $es_char_m . '</span>';
- } else if (!GESHI_PHP_PRE_433 && 'utf-8' == $this->encoding) {
- if(preg_match("/[\xC2-\xDF][\x80-\xBF]".
- "|\xE0[\xA0-\xBF][\x80-\xBF]".
- "|[\xE1-\xEC\xEE\xEF][\x80-\xBF]{2}".
- "|\xED[\x80-\x9F][\x80-\xBF]".
- "|\xF0[\x90-\xBF][\x80-\xBF]{2}".
- "|[\xF1-\xF3][\x80-\xBF]{3}".
- "|\xF4[\x80-\x8F][\x80-\xBF]{2}/s",
- $part, $es_char_m, null, $es_pos + 1)) {
- $es_char_m = $es_char_m[0];
- } else {
- $es_char_m = $es_char;
- }
- $string .= $this->hsc($es_char_m) . '</span>';
- } else {
- $es_char_m = $this->hsc($es_char);
- }
- $start = $es_pos + strlen($es_char_m) + 1;
- } else {
- $string .= $this->hsc($es_char) . '</span>';
- $start = $es_pos + 2;
- }
- } else if ($next_escape_regexp_pos < $length &&
- $next_escape_regexp_pos < $close_pos) {
- $es_pos = $next_escape_regexp_pos;
- //Add the stuff not in the string yet ...
- $string .= $this->hsc(substr($part, $start, $es_pos - $start));
- //Get the key and length of this match ...
- $escape = $escape_regexp_cache_per_key[$next_escape_regexp_key];
- $escape_str = substr($part, $es_pos, $escape['length']);
- $escape_key = $escape['key'];
- //Get the style for this escaped char ...
- if (!$this->use_classes) {
- $escape_char_attributes = ' style="' . $this->language_data['STYLES']['ESCAPE_CHAR'][$escape_key] . '"';
- } else {
- $escape_char_attributes = ' class="es' . $escape_key . '"';
- }
- //Add the style for the escape char ...
- $string .= "<span$escape_char_attributes>" .
- $this->hsc($escape_str) . '</span>';
- $start = $es_pos + $escape['length'];
- } else {
- //Copy the remainder of the string ...
- $string .= $this->hsc(substr($part, $start, $close_pos - $start + $char_len)) . '</span>';
- $start = $close_pos + $char_len;
- $string_open = false;
- }
- } while($string_open);
- if ($check_linenumbers) {
- // Are line numbers used? If, we should end the string before
- // the newline and begin it again (so when <li>s are put in the source
- // remains XHTML compliant)
- // note to self: This opens up possibility of config files specifying
- // that languages can/cannot have multiline strings???
- $string = str_replace("\n", "</span>\n<span$string_attributes>", $string);
- }
- $result .= $string;
- $string = '';
- $i = $start - 1;
- continue;
- } else if ($this->lexic_permissions['STRINGS'] && $hq && $hq[0] == $char &&
- substr($part, $i, $hq_strlen) == $hq && ($i != $next_comment_regexp_pos)) {
- // The start of a hard quoted string
- if (!$this->use_classes) {
- $string_attributes = ' style="' . $this->language_data['STYLES']['STRINGS']['HARD'] . '"';
- $escape_char_attributes = ' style="' . $this->language_data['STYLES']['ESCAPE_CHAR']['HARD'] . '"';
- } else {
- $string_attributes = ' class="st_h"';
- $escape_char_attributes = ' class="es_h"';
- }
- // parse the stuff before this
- $result .= $this->parse_non_string_part($stuff_to_parse);
- $stuff_to_parse = '';
- // now handle the string
- $string = '';
- // look for closing quote
- $start = $i + $hq_strlen;
- while ($close_pos = strpos($part, $this->language_data['HARDQUOTE'][1], $start)) {
- $start = $close_pos + 1;
- if ($this->lexic_permissions['ESCAPE_CHAR'] && $part[$close_pos - 1] == $this->language_data['HARDCHAR'] &&
- (($i + $hq_strlen) != ($close_pos))) { //Support empty string for HQ escapes if Starter = Escape
- // make sure this quote is not escaped
- foreach ($this->language_data['HARDESCAPE'] as $hardescape) {
- if (substr($part, $close_pos - 1, strlen($hardescape)) == $hardescape) {
- // check wether this quote is escaped or if it is something like '\\'
- $escape_char_pos = $close_pos - 1;
- while ($escape_char_pos > 0
- && $part[$escape_char_pos - 1] == $this->language_data['HARDCHAR']) {
- --$escape_char_pos;
- }
- if (($close_pos - $escape_char_pos) & 1) {
- // uneven number of escape chars => this quote is escaped
- continue 2;
- }
- }
- }
- }
- // found closing quote
- break;
- }
- //Found the closing delimiter?
- if (!$close_pos) {
- // span till the end of this $part when no closing delimiter is found
- $close_pos = $length;
- }
- //Get the actual string
- $string = substr($part, $i, $close_pos - $i + 1);
- $i = $close_pos;
- // handle escape chars and encode html chars
- // (special because when we have escape chars within our string they may not be escaped)
- if ($this->lexic_permissions['ESCAPE_CHAR'] && $this->language_data['ESCAPE_CHAR']) {
- $start = 0;
- $new_string = '';
- while ($es_pos = strpos($string, $this->language_data['ESCAPE_CHAR'], $start)) {
- // hmtl escape stuff before
- $new_string .= $this->hsc(substr($string, $start, $es_pos - $start));
- // check if this is a hard escape
- foreach ($this->language_data['HARDESCAPE'] as $hardescape) {
- if (substr($string, $es_pos, strlen($hardescape)) == $hardescape) {
- // indeed, this is a hardescape
- $new_string .= "<span$escape_char_attributes>" .
- $this->hsc($hardescape) . '</span>';
- $start = $es_pos + strlen($hardescape);
- continue 2;
- }
- }
- // not a hard escape, but a normal escape
- // they come in pairs of two
- $c = 0;
- while (isset($string[$es_pos + $c]) && isset($string[$es_pos + $c + 1])
- && $string[$es_pos + $c] == $this->language_data['ESCAPE_CHAR']
- && $string[$es_pos + $c + 1] == $this->language_data['ESCAPE_CHAR']) {
- $c += 2;
- }
- if ($c) {
- $new_string .= "<span$escape_char_attributes>" .
- str_repeat($escaped_escape_char, $c) .
- '</span>';
- $start = $es_pos + $c;
- } else {
- // this is just a single lonely escape char...
- $new_string .= $escaped_escape_char;
- $start = $es_pos + 1;
- }
- }
- $string = $new_string . $this->hsc(substr($string, $start));
- } else {
- $string = $this->hsc($string);
- }
- if ($check_linenumbers) {
- // Are line numbers used? If, we should end the string before
- // the newline and begin it again (so when <li>s are put in the source
- // remains XHTML compliant)
- // note to self: This opens up possibility of config files specifying
- // that languages can/cannot have multiline strings???
- $string = str_replace("\n", "</span>\n<span$string_attributes>", $string);
- }
- $result .= "<span$string_attributes>" . $string . '</span>';
- $string = '';
- continue;
- } else {
- //Have a look for regexp comments
- if ($i == $next_comment_regexp_pos) {
- $COMMENT_MATCHED = true;
- $comment = $comment_regexp_cache_per_key[$next_comment_regexp_key];
- $test_str = $this->hsc(substr($part, $i, $comment['length']));
- //@todo If remove important do remove here
- if ($this->lexic_permissions['COMMENTS']['MULTI']) {
- if (!$this->use_classes) {
- $attributes = ' style="' . $this->language_data['STYLES']['COMMENTS'][$comment['key']] . '"';
- } else {
- $attributes = ' class="co' . $comment['key'] . '"';
- }
- $test_str = "<span$attributes>" . $test_str . "</span>";
- // Short-cut through all the multiline code
- if ($check_linenumbers) {
- // strreplace to put close span and open span around multiline newlines
- $test_str = str_replace(
- "\n", "</span>\n<span$attributes>",
- str_replace("\n ", "\n ", $test_str)
- );
- }
- }
- $i += $comment['length'] - 1;
- // parse the rest
- $result .= $this->parse_non_string_part($stuff_to_parse);
- $stuff_to_parse = '';
- }
- // If we haven't matched a regexp comment, try multi-line comments
- if (!$COMMENT_MATCHED) {
- // Is this a multiline comment?
- if (!empty($this->language_data['COMMENT_MULTI']) && $next_comment_multi_pos < $i) {
- $next_comment_multi_pos = $length;
- foreach ($this->language_data['COMMENT_MULTI'] as $open => $close) {
- $match_i = false;
- if (isset($comment_multi_cache_per_key[$open]) &&
- ($comment_multi_cache_per_key[$open] >= $i ||
- $comment_multi_cache_per_key[$open] === false)) {
- // we have already matched something
- if ($comment_multi_cache_per_key[$open] === false) {
- // this comment is never matched
- continue;
- }
- $match_i = $comment_multi_cache_per_key[$open];
- } else if (($match_i = stripos($part, $open, $i)) !== false) {
- $comment_multi_cache_per_key[$open] = $match_i;
- } else {
- $comment_multi_cache_per_key[$open] = false;
- continue;
- }
- if ($match_i !== false && $match_i < $next_comment_multi_pos) {
- $next_comment_multi_pos = $match_i;
- $next_open_comment_multi = $open;
- if ($match_i === $i) {
- break;
- }
- }
- }
- }
- if ($i == $next_comment_multi_pos) {
- $open = $next_open_comment_multi;
- $close = $this->language_data['COMMENT_MULTI'][$open];
- $open_strlen = strlen($open);
- $close_strlen = strlen($close);
- $COMMENT_MATCHED = true;
- $test_str_match = $open;
- //@todo If remove important do remove here
- if ($this->lexic_permissions['COMMENTS']['MULTI'] ||
- $open == GESHI_START_IMPORTANT) {
- if ($open != GESHI_START_IMPORTANT) {
- if (!$this->use_classes) {
- $attributes = ' style="' . $this->language_data['STYLES']['COMMENTS']['MULTI'] . '"';
- } else {
- $attributes = ' class="coMULTI"';
- }
- $test_str = "<span$attributes>" . $this->hsc($open);
- } else {
- if (!$this->use_classes) {
- $attributes = ' style="' . $this->important_styles . '"';
- } else {
- $attributes = ' class="imp"';
- }
- // We don't include the start of the comment if it's an
- // "important" part
- $test_str = "<span$attributes>";
- }
- } else {
- $test_str = $this->hsc($open);
- }
- $close_pos = strpos( $part, $close, $i + $open_strlen );
- if ($close_pos === false) {
- $close_pos = $length;
- }
- // Short-cut through all the multiline code
- $rest_of_comment = $this->hsc(substr($part, $i + $open_strlen, $close_pos - $i - $open_strlen + $close_strlen));
- if (($this->lexic_permissions['COMMENTS']['MULTI'] ||
- $test_str_match == GESHI_START_IMPORTANT) &&
- $check_linenumbers) {
- // strreplace to put close span and open span around multiline newlines
- $test_str .= str_replace(
- "\n", "</span>\n<span$attributes>",
- str_replace("\n ", "\n ", $rest_of_comment)
- );
- } else {
- $test_str .= $rest_of_comment;
- }
- if ($this->lexic_permissions['COMMENTS']['MULTI'] ||
- $test_str_match == GESHI_START_IMPORTANT) {
- $test_str .= '</span>';
- }
- $i = $close_pos + $close_strlen - 1;
- // parse the rest
- $result .= $this->parse_non_string_part($stuff_to_parse);
- $stuff_to_parse = '';
- }
- }
- // If we haven't matched a multiline comment, try single-line comments
- if (!$COMMENT_MATCHED) {
- // cache potential single line comment occurances
- if (!empty($this->language_data['COMMENT_SINGLE']) && $next_comment_single_pos < $i) {
- $next_comment_single_pos = $length;
- foreach ($this->language_data['COMMENT_SINGLE'] as $comment_key => $comment_mark) {
- $match_i = false;
- if (isset($comment_single_cache_per_key[$comment_key]) &&
- ($comment_single_cache_per_key[$comment_key] >= $i ||
- $comment_single_cache_per_key[$comment_key] === false)) {
- // we have already matched something
- if ($comment_single_cache_per_key[$comment_key] === false) {
- // this comment is never matched
- continue;
- }
- $match_i = $comment_single_cache_per_key[$comment_key];
- } else if (
- // case sensitive comments
- ($this->language_data['CASE_SENSITIVE'][GESHI_COMMENTS] &&
- ($match_i = stripos($part, $comment_mark, $i)) !== false) ||
- // non case sensitive
- (!$this->language_data['CASE_SENSITIVE'][GESHI_COMMENTS] &&
- (($match_i = strpos($part, $comment_mark, $i)) !== false))) {
- $comment_single_cache_per_key[$comment_key] = $match_i;
- } else {
- $comment_single_cache_per_key[$comment_key] = false;
- continue;
- }
- if ($match_i !== false && $match_i < $next_comment_single_pos) {
- $next_comment_single_pos = $match_i;
- $next_comment_single_key = $comment_key;
- if ($match_i === $i) {
- break;
- }
- }
- }
- }
- if ($next_comment_single_pos == $i) {
- $comment_key = $next_comment_single_key;
- $comment_mark = $this->language_data['COMMENT_SINGLE'][$comment_key];
- $com_len = strlen($comment_mark);
- // This check will find special variables like $# in bash
- // or compiler directives of Delphi beginning {$
- if ((empty($sc_disallowed_before) || ($i == 0) ||
- (false === strpos($sc_disallowed_before, $part[$i-1]))) &&
- (empty($sc_disallowed_after) || ($length <= $i + $com_len) ||
- (false === strpos($sc_disallowed_after, $part[$i + $com_len]))))
- {
- // this is a valid comment
- $COMMENT_MATCHED = true;
- if ($this->lexic_permissions['COMMENTS'][$comment_key]) {
- if (!$this->use_classes) {
- $attributes = ' style="' . $this->language_data['STYLES']['COMMENTS'][$comment_key] . '"';
- } else {
- $attributes = ' class="co' . $comment_key . '"';
- }
- $test_str = "<span$attributes>" . $this->hsc($this->change_case($comment_mark));
- } else {
- $test_str = $this->hsc($comment_mark);
- }
- //Check if this comment is the last in the source
- $close_pos = strpos($part, "\n", $i);
- $oops = false;
- if ($close_pos === false) {
- $close_pos = $length;
- $oops = true;
- }
- $test_str .= $this->hsc(substr($part, $i + $com_len, $close_pos - $i - $com_len));
- if ($this->lexic_permissions['COMMENTS'][$comment_key]) {
- $test_str .= "</span>";
- }
- // Take into account that the comment might be the last in the source
- if (!$oops) {
- $test_str .= "\n";
- }
- $i = $close_pos;
- // parse the rest
- $result .= $this->parse_non_string_part($stuff_to_parse);
- $stuff_to_parse = '';
- }
- }
- }
- }
- // Where are we adding this char?
- if (!$COMMENT_MATCHED) {
- $stuff_to_parse .= $char;
- } else {
- $result .= $test_str;
- unset($test_str);
- $COMMENT_MATCHED = false;
- }
- }
- // Parse the last bit
- $result .= $this->parse_non_string_part($stuff_to_parse);
- $stuff_to_parse = '';
- } else {
- $result .= $this->hsc($part);
- }
- // Close the <span> that surrounds the block
- if ($STRICTATTRS != '') {
- $result = str_replace("\n", "</span>\n<span$STRICTATTRS>", $result);
- $result .= '</span>';
- }
- $endresult .= $result;
- unset($part, $parts[$key], $result);
- }
- //This fix is related to SF#1923020, but has to be applied regardless of
- //actually highlighting symbols.
- /** NOTE: memorypeak #3 */
- $endresult = str_replace(array('<SEMI>', '<PIPE>'), array(';', '|'), $endresult);
- // // Parse the last stuff (redundant?)
- // $result .= $this->parse_non_string_part($stuff_to_parse);
- // Lop off the very first and last spaces
- // $result = substr($result, 1, -1);
- // We're finished: stop timing
- $this->set_time($start_time, microtime());
- $this->finalise($endresult);
- return $endresult;
- }
- /**
- * Swaps out spaces and tabs for HTML indentation. Not needed if
- * the code is in a pre block...
- *
- * @param string The source to indent (reference!)
- * @since 1.0.0
- * @access private
- */
- function indent(&$result) {
- /// Replace tabs with the correct number of spaces
- if (false !== strpos($result, "\t")) {
- $lines = explode("\n", $result);
- $result = null;//Save memory while we process the lines individually
- $tab_width = $this->get_real_tab_width();
- $tab_string = ' ' . str_repeat(' ', $tab_width);
- for ($key = 0, $n = count($lines); $key < $n; $key++) {
- $line = $lines[$key];
- if (false === strpos($line, "\t")) {
- continue;
- }
- $pos = 0;
- $length = strlen($line);
- $lines[$key] = ''; // reduce memory
- $IN_TAG = false;
- for ($i = 0; $i < $length; ++$i) {
- $char = $line[$i];
- // Simple engine to work out whether we're in a tag.
- // If we are we modify $pos. This is so we ignore HTML
- // in the line and only workout the tab replacement
- // via the actual content of the string
- // This test could be improved to include strings in the
- // html so that < or > would be allowed in user's styles
- // (e.g. quotes: '<' '>'; or similar)
- if ($IN_TAG) {
- if ('>' == $char) {
- $IN_TAG = false;
- }
- $lines[$key] .= $char;
- } else if ('<' == $char) {
- $IN_TAG = true;
- $lines[$key] .= '<';
- } else if ('&' == $char) {
- $substr = substr($line, $i + 3, 5);
- $posi = strpos($substr, ';');
- if (false === $posi) {
- ++$pos;
- } else {
- $pos -= $posi+2;
- }
- $lines[$key] .= $char;
- } else if ("\t" == $char) {
- $str = '';
- // OPTIMISE - move $strs out. Make an array:
- // $tabs = array(
- // 1 => ' ',
- // 2 => ' ',
- // 3 => ' ' etc etc
- // to use instead of building a string every time
- $tab_end_width = $tab_width - ($pos % $tab_width); //Moved out of the look as it doesn't change within the loop
- if (($pos & 1) || 1 == $tab_end_width) {
- $str .= substr($tab_string, 6, $tab_end_width);
- } else {
- $str .= substr($tab_string, 0, $tab_end_width+5);
- }
- $lines[$key] .= $str;
- $pos += $tab_end_width;
- if (false === strpos($line, "\t", $i + 1)) {
- $lines[$key] .= substr($line, $i + 1);
- break;
- }
- } else if (0 == $pos && ' ' == $char) {
- $lines[$key] .= ' ';
- ++$pos;
- } else {
- $lines[$key] .= $char;
- ++$pos;
- }
- }
- }
- $result = implode("\n", $lines);
- unset($lines);//We don't need the lines separated beyond this --- free them!
- }
- // Other whitespace
- // BenBE: Fix to reduce the number of replacements to be done
- $result = preg_replace('/^ /m', ' ', $result);
- $result = str_replace(' ', ' ', $result);
- if ($this->line_numbers == GESHI_NO_LINE_NUMBERS && $this->header_type != GESHI_HEADER_PRE_TABLE) {
- if ($this->line_ending === null) {
- $result = nl2br($result);
- } else {
- $result = str_replace("\n", $this->line_ending, $result);
- }
- }
- }
- /**
- * Changes the case of a keyword for those languages where a change is asked for
- *
- * @param string The keyword to change the case of
- * @return string The keyword with its case changed
- * @since 1.0.0
- * @access private
- */
- function change_case($instr) {
- switch ($this->language_data['CASE_KEYWORDS']) {
- case GESHI_CAPS_UPPER:
- return strtoupper($instr);
- case GESHI_CAPS_LOWER:
- return strtolower($instr);
- default:
- return $instr;
- }
- }
- /**
- * Handles replacements of keywords to include markup and links if requested
- *
- * @param string The keyword to add the Markup to
- * @return The HTML for the match found
- * @since 1.0.8
- * @access private
- *
- * @todo Get rid of ender in keyword links
- */
- function handle_keyword_replace($match) {
- $k = $this->_kw_replace_group;
- $keyword = $match[0];
- $before = '';
- $after = '';
- if ($this->keyword_links) {
- // Keyword links have been ebabled
- if (isset($this->language_data['URLS'][$k]) &&
- $this->language_data['URLS'][$k] != '') {
- // There is a base group for this keyword
- // Old system: strtolower
- //$keyword = ( $this->language_data['CASE_SENSITIVE'][$group] ) ? $keyword : strtolower($keyword);
- // New system: get keyword from language file to get correct case
- if (!$this->language_data['CASE_SENSITIVE'][$k] &&
- strpos($this->language_data['URLS'][$k], '{FNAME}') !== false) {
- foreach ($this->language_data['KEYWORDS'][$k] as $word) {
- if (strcasecmp($word, $keyword) == 0) {
- break;
- }
- }
- } else {
- $word = $keyword;
- }
- $before = '<|UR1|"' .
- str_replace(
- array(
- '{FNAME}',
- '{FNAMEL}',
- '{FNAMEU}',
- '.'),
- array(
- str_replace('+', '%20', urlencode($this->hsc($word))),
- str_replace('+', '%20', urlencode($this->hsc(strtolower($word)))),
- str_replace('+', '%20', urlencode($this->hsc(strtoupper($word)))),
- '<DOT>'),
- $this->language_data['URLS'][$k]
- ) . '">';
- $after = '</a>';
- }
- }
- return $before . '<|/'. $k .'/>' . $this->change_case($keyword) . '|>' . $after;
- }
- /**
- * handles regular expressions highlighting-definitions with callback functions
- *
- * @note this is a callback, don't use it directly
- *
- * @param array the matches array
- * @return The highlighted string
- * @since 1.0.8
- * @access private
- */
- function handle_regexps_callback($matches) {
- // before: "' style=\"' . call_user_func(\"$func\", '\\1') . '\"\\1|>'",
- return ' style="' . call_user_func($this->language_data['STYLES']['REGEXPS'][$this->_rx_key], $matches[1]) . '"'. $matches[1] . '|>';
- }
- /**
- * handles newlines in REGEXPS matches. Set the _hmr_* vars before calling this
- *
- * @note this is a callback, don't use it directly
- *
- * @param array the matches array
- * @return string
- * @since 1.0.8
- * @access private
- */
- function handle_multiline_regexps($matches) {
- $before = $this->_hmr_before;
- $after = $this->_hmr_after;
- if ($this->_hmr_replace) {
- $replace = $this->_hmr_replace;
- $search = array();
- foreach (array_keys($matches) as $k) {
- $search[] = '\\' . $k;
- }
- $before = str_replace($search, $matches, $before);
- $after = str_replace($search, $matches, $after);
- $replace = str_replace($search, $matches, $replace);
- } else {
- $replace = $matches[0];
- }
- return $before
- . '<|!REG3XP' . $this->_hmr_key .'!>'
- . str_replace("\n", "|>\n<|!REG3XP" . $this->_hmr_key . '!>', $replace)
- . '|>'
- . $after;
- }
- /**
- * Takes a string that has no strings or comments in it, and highlights
- * stuff like keywords, numbers and methods.
- *
- * @param string The string to parse for keyword, numbers etc.
- * @since 1.0.0
- * @access private
- * @todo BUGGY! Why? Why not build string and return?
- */
- function parse_non_string_part($stuff_to_parse) {
- $stuff_to_parse = ' ' . $this->hsc($stuff_to_parse);
- // Highlight keywords
- $disallowed_before = "(?<![a-zA-Z0-9\$_\|\#|^&";
- $disallowed_after = "(?![a-zA-Z0-9_\|%\\-&;";
- if ($this->lexic_permissions['STRINGS']) {
- $quotemarks = preg_quote(implode($this->language_data['QUOTEMARKS']), '/');
- $disallowed_before .= $quotemarks;
- $disallowed_after .= $quotemarks;
- }
- $disallowed_before .= "])";
- $disallowed_after .= "])";
- $parser_control_pergroup = false;
- if (isset($this->language_data['PARSER_CONTROL'])) {
- if (isset($this->language_data['PARSER_CONTROL']['KEYWORDS'])) {
- $x = 0; // check wether per-keyword-group parser_control is enabled
- if (isset($this->language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_BEFORE'])) {
- $disallowed_before = $this->language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_BEFORE'];
- ++$x;
- }
- if (isset($this->language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_AFTER'])) {
- $disallowed_after = $this->language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_AFTER'];
- ++$x;
- }
- $parser_control_pergroup = (count($this->language_data['PARSER_CONTROL']['KEYWORDS']) - $x) > 0;
- }
- }
- foreach (array_keys($this->language_data['KEYWORDS']) as $k) {
- if (!isset($this->lexic_permissions['KEYWORDS'][$k]) ||
- $this->lexic_permissions['KEYWORDS'][$k]) {
- $case_sensitive = $this->language_data['CASE_SENSITIVE'][$k];
- $modifiers = $case_sensitive ? '' : 'i';
- // NEW in 1.0.8 - per-keyword-group parser control
- $disallowed_before_local = $disallowed_before;
- $disallowed_after_local = $disallowed_after;
- if ($parser_control_pergroup && isset($this->language_data['PARSER_CONTROL']['KEYWORDS'][$k])) {
- if (isset($this->language_data['PARSER_CONTROL']['KEYWORDS'][$k]['DISALLOWED_BEFORE'])) {
- $disallowed_before_local =
- $this->language_data['PARSER_CONTROL']['KEYWORDS'][$k]['DISALLOWED_BEFORE'];
- }
- if (isset($this->language_data['PARSER_CONTROL']['KEYWORDS'][$k]['DISALLOWED_AFTER'])) {
- $disallowed_after_local =
- $this->language_data['PARSER_CONTROL']['KEYWORDS'][$k]['DISALLOWED_AFTER'];
- }
- }
- $this->_kw_replace_group = $k;
- //NEW in 1.0.8, the cached regexp list
- // since we don't want PHP / PCRE to crash due to too large patterns we split them into smaller chunks
- for ($set = 0, $set_length = count($this->language_data['CACHED_KEYWORD_LISTS'][$k]); $set < $set_length; ++$set) {
- $keywordset =& $this->language_data['CACHED_KEYWORD_LISTS'][$k][$set];
- // Might make a more unique string for putting the number in soon
- // Basically, we don't put the styles in yet because then the styles themselves will
- // get highlighted if the language has a CSS keyword in it (like CSS, for example ;))
- $stuff_to_parse = preg_replace_callback(
- "/$disallowed_before_local({$keywordset})(?!\<DOT\>(?:htm|php|aspx?))$disallowed_after_local/$modifiers",
- array($this, 'handle_keyword_replace'),
- $stuff_to_parse
- );
- }
- }
- }
- // Regular expressions
- foreach ($this->language_data['REGEXPS'] as $key => $regexp) {
- if ($this->lexic_permissions['REGEXPS'][$key]) {
- if (is_array($regexp)) {
- if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) {
- // produce valid HTML when we match multiple lines
- $this->_hmr_replace = $regexp[GESHI_REPLACE];
- $this->_hmr_before = $regexp[GESHI_BEFORE];
- $this->_hmr_key = $key;
- $this->_hmr_after = $regexp[GESHI_AFTER];
- $stuff_to_parse = preg_replace_callback(
- "/" . $regexp[GESHI_SEARCH] . "/{$regexp[GESHI_MODIFIERS]}",
- array($this, 'handle_multiline_regexps'),
- $stuff_to_parse);
- $this->_hmr_replace = false;
- $this->_hmr_before = '';
- $this->_hmr_after = '';
- } else {
- $stuff_to_parse = preg_replace(
- '/' . $regexp[GESHI_SEARCH] . '/' . $regexp[GESHI_MODIFIERS],
- $regexp[GESHI_BEFORE] . '<|!REG3XP'. $key .'!>' . $regexp[GESHI_REPLACE] . '|>' . $regexp[GESHI_AFTER],
- $stuff_to_parse);
- }
- } else {
- if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) {
- // produce valid HTML when we match multiple lines
- $this->_hmr_key = $key;
- $stuff_to_parse = preg_replace_callback( "/(" . $regexp . ")/",
- array($this, 'handle_multiline_regexps'), $stuff_to_parse);
- $this->_hmr_key = '';
- } else {
- $stuff_to_parse = preg_replace( "/(" . $regexp . ")/", "<|!REG3XP$key!>\\1|>", $stuff_to_parse);
- }
- }
- }
- }
- // Highlight numbers. As of 1.0.8 we support different types of numbers
- $numbers_found = false;
- if ($this->lexic_permissions['NUMBERS'] && preg_match($this->language_data['PARSER_CONTROL']['NUMBERS']['PRECHECK_RX'], $stuff_to_parse )) {
- $numbers_found = true;
- //For each of the formats ...
- foreach($this->language_data['NUMBERS_RXCACHE'] as $id => $regexp) {
- //Check if it should be highlighted ...
- $stuff_to_parse = preg_replace($regexp, "<|/NUM!$id/>\\1|>", $stuff_to_parse);
- }
- }
- //
- // Now that's all done, replace /[number]/ with the correct styles
- //
- foreach (array_keys($this->language_data['KEYWORDS']) as $k) {
- if (!$this->use_classes) {
- $attributes = ' style="' .
- (isset($this->language_data['STYLES']['KEYWORDS'][$k]) ?
- $this->language_data['STYLES']['KEYWORDS'][$k] : "") . '"';
- } else {
- $attributes = ' class="kw' . $k . '"';
- }
- $stuff_to_parse = str_replace("<|/$k/>", "<|$attributes>", $stuff_to_parse);
- }
- if ($numbers_found) {
- // Put number styles in
- foreach($this->language_data['NUMBERS_RXCACHE'] as $id => $regexp) {
- //Commented out for now, as this needs some review ...
- // if ($numbers_permissions & $id) {
- //Get the appropriate style ...
- //Checking for unset styles is done by the style cache builder ...
- if (!$this->use_classes) {
- $attributes = ' style="' . $this->language_data['STYLES']['NUMBERS'][$id] . '"';
- } else {
- $attributes = ' class="nu'.$id.'"';
- }
- //Set in the correct styles ...
- $stuff_to_parse = str_replace("/NUM!$id/", $attributes, $stuff_to_parse);
- // }
- }
- }
- // Highlight methods and fields in objects
- if ($this->lexic_permissions['METHODS'] && $this->language_data['OOLANG']) {
- $oolang_spaces = "[\s]*";
- $oolang_before = "";
- $oolang_after = "[a-zA-Z][a-zA-Z0-9_]*";
- if (isset($this->language_data['PARSER_CONTROL'])) {
- if (isset($this->language_data['PARSER_CONTROL']['OOLANG'])) {
- if (isset($this->language_data['PARSER_CONTROL']['OOLANG']['MATCH_BEFORE'])) {
- $oolang_before = $this->language_data['PARSER_CONTROL']['OOLANG']['MATCH_BEFORE'];
- }
- if (isset($this->language_data['PARSER_CONTROL']['OOLANG']['MATCH_AFTER'])) {
- $oolang_after = $this->language_data['PARSER_CONTROL']['OOLANG']['MATCH_AFTER'];
- }
- if (isset($this->language_data['PARSER_CONTROL']['OOLANG']['MATCH_SPACES'])) {
- $oolang_spaces = $this->language_data['PARSER_CONTROL']['OOLANG']['MATCH_SPACES'];
- }
- }
- }
- foreach ($this->language_data['OBJECT_SPLITTERS'] as $key => $splitter) {
- if (false !== strpos($stuff_to_parse, $splitter)) {
- if (!$this->use_classes) {
- $attributes = ' style="' . $this->language_data['STYLES']['METHODS'][$key] . '"';
- } else {
- $attributes = ' class="me' . $key . '"';
- }
- $stuff_to_parse = preg_replace("/($oolang_before)(" . preg_quote($this->language_data['OBJECT_SPLITTERS'][$key], '/') . ")($oolang_spaces)($oolang_after)/", "\\1\\2\\3<|$attributes>\\4|>", $stuff_to_parse);
- }
- }
- }
- //
- // Highlight brackets. Yes, I've tried adding a semi-colon to this list.
- // You try it, and see what happens ;)
- // TODO: Fix lexic permissions not converting entities if shouldn't
- // be highlighting regardless
- //
- if ($this->lexic_permissions['BRACKETS']) {
- $stuff_to_parse = str_replace( $this->language_data['CACHE_BRACKET_MATCH'],
- $this->language_data['CACHE_BRACKET_REPLACE'], $stuff_to_parse );
- }
- //FIX for symbol highlighting ...
- if ($this->lexic_permissions['SYMBOLS'] && !empty($this->language_data['SYMBOLS'])) {
- //Get all matches and throw away those witin a block that is already highlighted... (i.e. matched by a regexp)
- $n_symbols = preg_match_all("/<\|(?:<DOT>|[^>])+>(?:(?!\|>).*?)\|>|<\/a>|(?:" . $this->language_data['SYMBOL_SEARCH'] . ")+(?![^<]+?>)/", $stuff_to_parse, $pot_symbols, PREG_OFFSET_CAPTURE | PREG_SET_ORDER);
- $global_offset = 0;
- for ($s_id = 0; $s_id < $n_symbols; ++$s_id) {
- $symbol_match = $pot_symbols[$s_id][0][0];
- if (strpos($symbol_match, '<') !== false || strpos($symbol_match, '>') !== false) {
- // already highlighted blocks _must_ include either < or >
- // so if this conditional applies, we have to skip this match
- // BenBE: UNLESS the block contains <SEMI> or <PIPE>
- if(strpos($symbol_match, '<SEMI>') === false &&
- strpos($symbol_match, '<PIPE>') === false) {
- continue;
- }
- }
- // if we reach this point, we have a valid match which needs to be highlighted
- $symbol_length = strlen($symbol_match);
- $symbol_offset = $pot_symbols[$s_id][0][1];
- unset($pot_symbols[$s_id]);
- $symbol_end = $symbol_length + $symbol_offset;
- $symbol_hl = "";
- // if we have multiple styles, we have to handle them properly
- if ($this->language_data['MULTIPLE_SYMBOL_GROUPS']) {
- $old_sym = -1;
- // Split the current stuff to replace into its atomic symbols ...
- preg_match_all("/" . $this->language_data['SYMBOL_SEARCH'] . "/", $symbol_match, $sym_match_syms, PREG_PATTERN_ORDER);
- foreach ($sym_match_syms[0] as $sym_ms) {
- //Check if consequtive symbols belong to the same group to save output ...
- if (isset($this->language_data['SYMBOL_DATA'][$sym_ms])
- && ($this->language_data['SYMBOL_DATA'][$sym_ms] != $old_sym)) {
- if (-1 != $old_sym) {
- $symbol_hl .= "|>";
- }
- $old_sym = $this->language_data['SYMBOL_DATA'][$sym_ms];
- if (!$this->use_classes) {
- $symbol_hl .= '<| style="' . $this->language_data['STYLES']['SYMBOLS'][$old_sym] . '">';
- } else {
- $symbol_hl .= '<| class="sy' . $old_sym . '">';
- }
- }
- $symbol_hl .= $sym_ms;
- }
- unset($sym_match_syms);
- //Close remaining tags and insert the replacement at the right position ...
- //Take caution if symbol_hl is empty to avoid doubled closing spans.
- if (-1 != $old_sym) {
- $symbol_hl .= "|>";
- }
- } else {
- if (!$this->use_classes) {
- $symbol_hl = '<| style="' . $this->language_data['STYLES']['SYMBOLS'][0] . '">';
- } else {
- $symbol_hl = '<| class="sy0">';
- }
- $symbol_hl .= $symbol_match . '|>';
- }
- $stuff_to_parse = substr_replace($stuff_to_parse, $symbol_hl, $symbol_offset + $global_offset, $symbol_length);
- // since we replace old text with something of different size,
- // we'll have to keep track of the differences
- $global_offset += strlen($symbol_hl) - $symbol_length;
- }
- }
- //FIX for symbol highlighting ...
- // Add class/style for regexps
- foreach (array_keys($this->language_data['REGEXPS']) as $key) {
- if ($this->lexic_permissions['REGEXPS'][$key]) {
- if (is_callable($this->language_data['STYLES']['REGEXPS'][$key])) {
- $this->_rx_key = $key;
- $stuff_to_parse = preg_replace_callback("/!REG3XP$key!(.*)\|>/U",
- array($this, 'handle_regexps_callback'),
- $stuff_to_parse);
- } else {
- if (!$this->use_classes) {
- $attributes = ' style="' . $this->language_data['STYLES']['REGEXPS'][$key] . '"';
- } else {
- if (is_array($this->language_data['REGEXPS'][$key]) &&
- array_key_exists(GESHI_CLASS, $this->language_data['REGEXPS'][$key])) {
- $attributes = ' class="' .
- $this->language_data['REGEXPS'][$key][GESHI_CLASS] . '"';
- } else {
- $attributes = ' class="re' . $key . '"';
- }
- }
- $stuff_to_parse = str_replace("!REG3XP$key!", "$attributes", $stuff_to_parse);
- }
- }
- }
- // Replace <DOT> with . for urls
- $stuff_to_parse = str_replace('<DOT>', '.', $stuff_to_parse);
- // Replace <|UR1| with <a href= for urls also
- if (isset($this->link_styles[GESHI_LINK])) {
- if ($this->use_classes) {
- $stuff_to_parse = str_replace('<|UR1|', '<a' . $this->link_target . ' href=', $stuff_to_parse);
- } else {
- $stuff_to_parse = str_replace('<|UR1|', '<a' . $this->link_target . ' style="' . $this->link_styles[GESHI_LINK] . '" href=', $stuff_to_parse);
- }
- } else {
- $stuff_to_parse = str_replace('<|UR1|', '<a' . $this->link_target . ' href=', $stuff_to_parse);
- }
- //
- // NOW we add the span thingy ;)
- //
- $stuff_to_parse = str_replace('<|', '<span', $stuff_to_parse);
- $stuff_to_parse = str_replace ( '|>', '</span>', $stuff_to_parse );
- return substr($stuff_to_parse, 1);
- }
- /**
- * Sets the time taken to parse the code
- *
- * @param microtime The time when parsing started
- * @param microtime The time when parsing ended
- * @since 1.0.2
- * @access private
- */
- function set_time($start_time, $end_time) {
- $start = explode(' ', $start_time);
- $end = explode(' ', $end_time);
- $this->time = $end[0] + $end[1] - $start[0] - $start[1];
- }
- /**
- * Gets the time taken to parse the code
- *
- * @return double The time taken to parse the code
- * @since 1.0.2
- */
- function get_time() {
- return $this->time;
- }
- /**
- * Merges arrays recursively, overwriting values of the first array with values of later arrays
- *
- * @since 1.0.8
- * @access private
- */
- function merge_arrays() {
- $arrays = func_get_args();
- $narrays = count($arrays);
- // check arguments
- // comment out if more performance is necessary (in this case the foreach loop will trigger a warning if the argument is not an array)
- for ($i = 0; $i < $narrays; $i ++) {
- if (!is_array($arrays[$i])) {
- // also array_merge_recursive returns nothing in this case
- trigger_error('Argument #' . ($i+1) . ' is not an array - trying to merge array with scalar! Returning false!', E_USER_WARNING);
- return false;
- }
- }
- // the first array is in the output set in every case
- $ret = $arrays[0];
- // merege $ret with the remaining arrays
- for ($i = 1; $i < $narrays; $i ++) {
- foreach ($arrays[$i] as $key => $value) {
- if (is_array($value) && isset($ret[$key])) {
- // if $ret[$key] is not an array you try to merge an scalar value with an array - the result is not defined (incompatible arrays)
- // in this case the call will trigger an E_USER_WARNING and the $ret[$key] will be false.
- $ret[$key] = $this->merge_arrays($ret[$key], $value);
- } else {
- $ret[$key] = $value;
- }
- }
- }
- return $ret;
- }
- /**
- * Gets language information and stores it for later use
- *
- * @param string The filename of the language file you want to load
- * @since 1.0.0
- * @access private
- * @todo Needs to load keys for lexic permissions for keywords, regexps etc
- */
- function load_language($file_name) {
- if ($file_name == $this->loaded_language) {
- // this file is already loaded!
- return;
- }
- //Prepare some stuff before actually loading the language file
- $this->loaded_language = $file_name;
- $this->parse_cache_built = false;
- $this->enable_highlighting();
- $language_data = array();
- //Load the language file
- require $file_name;
- // Perhaps some checking might be added here later to check that
- // $language data is a valid thing but maybe not
- $this->language_data = $language_data;
- // Set strict mode if should be set
- $this->strict_mode = $this->language_data['STRICT_MODE_APPLIES'];
- // Set permissions for all lexics to true
- // so they'll be highlighted by default
- foreach (array_keys($this->language_data['KEYWORDS']) as $key) {
- if (!empty($this->language_data['KEYWORDS'][$key])) {
- $this->lexic_permissions['KEYWORDS'][$key] = true;
- } else {
- $this->lexic_permissions['KEYWORDS'][$key] = false;
- }
- }
- foreach (array_keys($this->language_data['COMMENT_SINGLE']) as $key) {
- $this->lexic_permissions['COMMENTS'][$key] = true;
- }
- foreach (array_keys($this->language_data['REGEXPS']) as $key) {
- $this->lexic_permissions['REGEXPS'][$key] = true;
- }
- // for BenBE and future code reviews:
- // we can use empty here since we only check for existance and emptiness of an array
- // if it is not an array at all but rather false or null this will work as intended as well
- // even if $this->language_data['PARSER_CONTROL'] is undefined this won't trigger a notice
- if (!empty($this->language_data['PARSER_CONTROL']['ENABLE_FLAGS'])) {
- foreach ($this->language_data['PARSER_CONTROL']['ENABLE_FLAGS'] as $flag => $value) {
- // it's either true or false and maybe is true as well
- $perm = $value !== GESHI_NEVER;
- if ($flag == 'ALL') {
- $this->enable_highlighting($perm);
- continue;
- }
- if (!isset($this->lexic_permissions[$flag])) {
- // unknown lexic permission
- continue;
- }
- if (is_array($this->lexic_permissions[$flag])) {
- foreach ($this->lexic_permissions[$flag] as $key => $val) {
- $this->lexic_permissions[$flag][$key] = $perm;
- }
- } else {
- $this->lexic_permissions[$flag] = $perm;
- }
- }
- unset($this->language_data['PARSER_CONTROL']['ENABLE_FLAGS']);
- }
- //Fix: Problem where hardescapes weren't handled if no ESCAPE_CHAR was given
- //You need to set one for HARDESCAPES only in this case.
- if(!isset($this->language_data['HARDCHAR'])) {
- $this->language_data['HARDCHAR'] = $this->language_data['ESCAPE_CHAR'];
- }
- //NEW in 1.0.8: Allow styles to be loaded from a separate file to override defaults
- $style_filename = substr($file_name, 0, -4) . '.style.php';
- if (is_readable($style_filename)) {
- //Clear any style_data that could have been set before ...
- if (isset($style_data)) {
- unset($style_data);
- }
- //Read the Style Information from the style file
- include $style_filename;
- //Apply the new styles to our current language styles
- if (isset($style_data) && is_array($style_data)) {
- $this->language_data['STYLES'] =
- $this->merge_arrays($this->language_data['STYLES'], $style_data);
- }
- }
- }
- /**
- * Takes the parsed code and various options, and creates the HTML
- * surrounding it to make it look nice.
- *
- * @param string The code already parsed (reference!)
- * @since 1.0.0
- * @access private
- */
- function finalise(&$parsed_code) {
- // Remove end parts of important declarations
- // This is BUGGY!! My fault for bad code: fix coming in 1.2
- // @todo Remove this crap
- if ($this->enable_important_blocks &&
- (strpos($parsed_code, $this->hsc(GESHI_START_IMPORTANT)) === false)) {
- $parsed_code = str_replace($this->hsc(GESHI_END_IMPORTANT), '', $parsed_code);
- }
- // Add HTML whitespace stuff if we're using the <div> header
- if ($this->header_type != GESHI_HEADER_PRE && $this->header_type != GESHI_HEADER_PRE_VALID) {
- $this->indent($parsed_code);
- }
- // purge some unnecessary stuff
- /** NOTE: memorypeak #1 */
- $parsed_code = preg_replace('#<span[^>]+>(\s*)</span>#', '\\1', $parsed_code);
- // If we are using IDs for line numbers, there needs to be an overall
- // ID set to prevent collisions.
- if ($this->add_ids && !$this->overall_id) {
- $this->overall_id = 'geshi-' . substr(md5(microtime()), 0, 4);
- }
- // Get code into lines
- /** NOTE: memorypeak #2 */
- $code = explode("\n", $parsed_code);
- $parsed_code = $this->header();
- // If we're using line numbers, we insert <li>s and appropriate
- // markup to style them (otherwise we don't need to do anything)
- if ($this->line_numbers != GESHI_NO_LINE_NUMBERS && $this->header_type != GESHI_HEADER_PRE_TABLE) {
- // If we're using the <pre> header, we shouldn't add newlines because
- // the <pre> will line-break them (and the <li>s already do this for us)
- $ls = ($this->header_type != GESHI_HEADER_PRE && $this->header_type != GESHI_HEADER_PRE_VALID) ? "\n" : '';
- // Set vars to defaults for following loop
- $i = 0;
- // Foreach line...
- for ($i = 0, $n = count($code); $i < $n;) {
- //Reset the attributes for a new line ...
- $attrs = array();
- // Make lines have at least one space in them if they're empty
- // BenBE: Checking emptiness using trim instead of relying on blanks
- if ('' == trim($code[$i])) {
- $code[$i] = ' ';
- }
- // If this is a "special line"...
- if ($this->line_numbers == GESHI_FANCY_LINE_NUMBERS &&
- $i % $this->line_nth_row == ($this->line_nth_row - 1)) {
- // Set the attributes to style the line
- if ($this->use_classes) {
- //$attr = ' class="li2"';
- $attrs['class'][] = 'li2';
- $def_attr = ' class="de2"';
- } else {
- //$attr = ' style="' . $this->line_style2 . '"';
- $attrs['style'][] = $this->line_style2;
- // This style "covers up" the special styles set for special lines
- // so that styles applied to special lines don't apply to the actual
- // code on that line
- $def_attr = ' style="' . $this->code_style . '"';
- }
- } else {
- if ($this->use_classes) {
- //$attr = ' class="li1"';
- $attrs['class'][] = 'li1';
- $def_attr = ' class="de1"';
- } else {
- //$attr = ' style="' . $this->line_style1 . '"';
- $attrs['style'][] = $this->line_style1;
- $def_attr = ' style="' . $this->code_style . '"';
- }
- }
- //Check which type of tag to insert for this line
- if ($this->header_type == GESHI_HEADER_PRE_VALID) {
- $start = "<pre$def_attr>";
- $end = '</pre>';
- } else {
- // Span or div?
- $start = "<div$def_attr>";
- $end = '</div>';
- }
- ++$i;
- // Are we supposed to use ids? If so, add them
- if ($this->add_ids) {
- $attrs['id'][] = "$this->overall_id-$i";
- }
- //Is this some line with extra styles???
- if (in_array($i, $this->highlight_extra_lines)) {
- if ($this->use_classes) {
- if (isset($this->highlight_extra_lines_styles[$i])) {
- $attrs['class'][] = "lx$i";
- } else {
- $attrs['class'][] = "ln-xtra";
- }
- } else {
- array_push($attrs['style'], $this->get_line_style($i));
- }
- }
- // Add in the line surrounded by appropriate list HTML
- $attr_string = '';
- foreach ($attrs as $key => $attr) {
- $attr_string .= ' ' . $key . '="' . implode(' ', $attr) . '"';
- }
- $parsed_code .= "<li$attr_string>$start{$code[$i-1]}$end</li>$ls";
- unset($code[$i - 1]);
- }
- } else {
- $n = count($code);
- if ($this->use_classes) {
- $attributes = ' class="de1"';
- } else {
- $attributes = ' style="'. $this->code_style .'"';
- }
- if ($this->header_type == GESHI_HEADER_PRE_VALID) {
- $parsed_code .= '<pre'. $attributes .'>';
- } elseif ($this->header_type == GESHI_HEADER_PRE_TABLE) {
- if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) {
- if ($this->use_classes) {
- $attrs = ' class="ln"';
- } else {
- $attrs = ' style="'. $this->table_linenumber_style .'"';
- }
- $parsed_code .= '<td'.$attrs.'><pre'.$attributes.'>';
- // get linenumbers
- // we don't merge it with the for below, since it should be better for
- // memory consumption this way
- // @todo: but... actually it would still be somewhat nice to merge the two loops
- // the mem peaks are at different positions
- for ($i = 0; $i < $n; ++$i) {
- $close = 0;
- // fancy lines
- if ($this->line_numbers == GESHI_FANCY_LINE_NUMBERS &&
- $i % $this->line_nth_row == ($this->line_nth_row - 1)) {
- // Set the attributes to style the line
- if ($this->use_classes) {
- $parsed_code .= '<span class="xtra li2"><span class="de2">';
- } else {
- // This style "covers up" the special styles set for special lines
- // so that styles applied to special lines don't apply to the actual
- // code on that line
- $parsed_code .= '<span style="display:block;' . $this->line_style2 . '">'
- .'<span style="' . $this->code_style .'">';
- }
- $close += 2;
- }
- //Is this some line with extra styles???
- if (in_array($i + 1, $this->highlight_extra_lines)) {
- if ($this->use_classes) {
- if (isset($this->highlight_extra_lines_styles[$i])) {
- $parsed_code .= "<span class=\"xtra lx$i\">";
- } else {
- $parsed_code .= "<span class=\"xtra ln-xtra\">";
- }
- } else {
- $parsed_code .= "<span style=\"display:block;" . $this->get_line_style($i) . "\">";
- }
- ++$close;
- }
- $parsed_code .= $this->line_numbers_start + $i;
- if ($close) {
- $parsed_code .= str_repeat('</span>', $close);
- } else if ($i != $n) {
- $parsed_code .= "\n";
- }
- }
- $parsed_code .= '</pre></td><td'.$attributes.'>';
- }
- $parsed_code .= '<pre'. $attributes .'>';
- }
- // No line numbers, but still need to handle highlighting lines extra.
- // Have to use divs so the full width of the code is highlighted
- $close = 0;
- for ($i = 0; $i < $n; ++$i) {
- // Make lines have at least one space in them if they're empty
- // BenBE: Checking emptiness using trim instead of relying on blanks
- if ('' == trim($code[$i])) {
- $code[$i] = ' ';
- }
- // fancy lines
- if ($this->line_numbers == GESHI_FANCY_LINE_NUMBERS &&
- $i % $this->line_nth_row == ($this->line_nth_row - 1)) {
- // Set the attributes to style the line
- if ($this->use_classes) {
- $parsed_code .= '<span class="xtra li2"><span class="de2">';
- } else {
- // This style "covers up" the special styles set for special lines
- // so that styles applied to special lines don't apply to the actual
- // code on that line
- $parsed_code .= '<span style="display:block;' . $this->line_style2 . '">'
- .'<span style="' . $this->code_style .'">';
- }
- $close += 2;
- }
- //Is this some line with extra styles???
- if (in_array($i + 1, $this->highlight_extra_lines)) {
- if ($this->use_classes) {
- if (isset($this->highlight_extra_lines_styles[$i])) {
- $parsed_code .= "<span class=\"xtra lx$i\">";
- } else {
- $parsed_code .= "<span class=\"xtra ln-xtra\">";
- }
- } else {
- $parsed_code .= "<span style=\"display:block;" . $this->get_line_style($i) . "\">";
- }
- ++$close;
- }
- $parsed_code .= $code[$i];
- if ($close) {
- $parsed_code .= str_repeat('</span>', $close);
- $close = 0;
- }
- elseif ($i + 1 < $n) {
- $parsed_code .= "\n";
- }
- unset($code[$i]);
- }
- if ($this->header_type == GESHI_HEADER_PRE_VALID || $this->header_type == GESHI_HEADER_PRE_TABLE) {
- $parsed_code .= '</pre>';
- }
- if ($this->header_type == GESHI_HEADER_PRE_TABLE && $this->line_numbers != GESHI_NO_LINE_NUMBERS) {
- $parsed_code .= '</td>';
- }
- }
- $parsed_code .= $this->footer();
- }
- /**
- * Creates the header for the code block (with correct attributes)
- *
- * @return string The header for the code block
- * @since 1.0.0
- * @access private
- */
- function header() {
- // Get attributes needed
- /**
- * @todo Document behaviour change - class is outputted regardless of whether
- * we're using classes or not. Same with style
- */
- $attributes = ' class="' . $this->_genCSSName($this->language);
- if ($this->overall_class != '') {
- $attributes .= " ".$this->_genCSSName($this->overall_class);
- }
- $attributes .= '"';
- if ($this->overall_id != '') {
- $attributes .= " id=\"{$this->overall_id}\"";
- }
- if ($this->overall_style != '' && !$this->use_classes) {
- $attributes .= ' style="' . $this->overall_style . '"';
- }
- $ol_attributes = '';
- if ($this->line_numbers_start != 1) {
- $ol_attributes .= ' start="' . $this->line_numbers_start . '"';
- }
- // Get the header HTML
- $header = $this->header_content;
- if ($header) {
- if ($this->header_type == GESHI_HEADER_PRE || $this->header_type == GESHI_HEADER_PRE_VALID) {
- $header = str_replace("\n", '', $header);
- }
- $header = $this->replace_keywords($header);
- if ($this->use_classes) {
- $attr = ' class="head"';
- } else {
- $attr = " style=\"{$this->header_content_style}\"";
- }
- if ($this->header_type == GESHI_HEADER_PRE_TABLE && $this->line_numbers != GESHI_NO_LINE_NUMBERS) {
- $header = "<thead><tr><td colspan=\"2\" $attr>$header</td></tr></thead>";
- } else {
- $header = "<div$attr>$header</div>";
- }
- }
- if (GESHI_HEADER_NONE == $this->header_type) {
- if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) {
- return "$header<ol$attributes$ol_attributes>";
- }
- return $header . ($this->force_code_block ? '<div>' : '');
- }
- // Work out what to return and do it
- if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) {
- if ($this->header_type == GESHI_HEADER_PRE) {
- return "<pre$attributes>$header<ol$ol_attributes>";
- } else if ($this->header_type == GESHI_HEADER_DIV ||
- $this->header_type == GESHI_HEADER_PRE_VALID) {
- return "<div$attributes>$header<ol$ol_attributes>";
- } else if ($this->header_type == GESHI_HEADER_PRE_TABLE) {
- return "<table$attributes>$header<tbody><tr class=\"li1\">";
- }
- } else {
- if ($this->header_type == GESHI_HEADER_PRE) {
- return "<pre$attributes>$header" .
- ($this->force_code_block ? '<div>' : '');
- } else {
- return "<div$attributes>$header" .
- ($this->force_code_block ? '<div>' : '');
- }
- }
- }
- /**
- * Returns the footer for the code block.
- *
- * @return string The footer for the code block
- * @since 1.0.0
- * @access private
- */
- function footer() {
- $footer = $this->footer_content;
- if ($footer) {
- if ($this->header_type == GESHI_HEADER_PRE) {
- $footer = str_replace("\n", '', $footer);;
- }
- $footer = $this->replace_keywords($footer);
- if ($this->use_classes) {
- $attr = ' class="foot"';
- } else {
- $attr = " style=\"{$this->footer_content_style}\"";
- }
- if ($this->header_type == GESHI_HEADER_PRE_TABLE && $this->line_numbers != GESHI_NO_LINE_NUMBERS) {
- $footer = "<tfoot><tr><td colspan=\"2\">$footer</td></tr></tfoot>";
- } else {
- $footer = "<div$attr>$footer</div>";
- }
- }
- if (GESHI_HEADER_NONE == $this->header_type) {
- return ($this->line_numbers != GESHI_NO_LINE_NUMBERS) ? '</ol>' . $footer : $footer;
- }
- if ($this->header_type == GESHI_HEADER_DIV || $this->header_type == GESHI_HEADER_PRE_VALID) {
- if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) {
- return "</ol>$footer</div>";
- }
- return ($this->force_code_block ? '</div>' : '') .
- "$footer</div>";
- }
- elseif ($this->header_type == GESHI_HEADER_PRE_TABLE) {
- if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) {
- return "</tr></tbody>$footer</table>";
- }
- return ($this->force_code_block ? '</div>' : '') .
- "$footer</div>";
- }
- else {
- if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) {
- return "</ol>$footer</pre>";
- }
- return ($this->force_code_block ? '</div>' : '') .
- "$footer</pre>";
- }
- }
- /**
- * Replaces certain keywords in the header and footer with
- * certain configuration values
- *
- * @param string The header or footer content to do replacement on
- * @return string The header or footer with replaced keywords
- * @since 1.0.2
- * @access private
- */
- function replace_keywords($instr) {
- $keywords = $replacements = array();
- $keywords[] = '<TIME>';
- $keywords[] = '{TIME}';
- $replacements[] = $replacements[] = number_format($time = $this->get_time(), 3);
- $keywords[] = '<LANGUAGE>';
- $keywords[] = '{LANGUAGE}';
- $replacements[] = $replacements[] = $this->language_data['LANG_NAME'];
- $keywords[] = '<VERSION>';
- $keywords[] = '{VERSION}';
- $replacements[] = $replacements[] = GESHI_VERSION;
- $keywords[] = '<SPEED>';
- $keywords[] = '{SPEED}';
- if ($time <= 0) {
- $speed = 'N/A';
- } else {
- $speed = strlen($this->source) / $time;
- if ($speed >= 1024) {
- $speed = sprintf("%.2f KB/s", $speed / 1024.0);
- } else {
- $speed = sprintf("%.0f B/s", $speed);
- }
- }
- $replacements[] = $replacements[] = $speed;
- return str_replace($keywords, $replacements, $instr);
- }
- /**
- * Secure replacement for PHP built-in function htmlspecialchars().
- *
- * See ticket #427 (http://wush.net/trac/wikka/ticket/427) for the rationale
- * for this replacement function.
- *
- * The INTERFACE for this function is almost the same as that for
- * htmlspecialchars(), with the same default for quote style; however, there
- * is no 'charset' parameter. The reason for this is as follows:
- *
- * The PHP docs say:
- * "The third argument charset defines character set used in conversion."
- *
- * I suspect PHP's htmlspecialchars() is working at the byte-value level and
- * thus _needs_ to know (or asssume) a character set because the special
- * characters to be replaced could exist at different code points in
- * different character sets. (If indeed htmlspecialchars() works at
- * byte-value level that goes some way towards explaining why the
- * vulnerability would exist in this function, too, and not only in
- * htmlentities() which certainly is working at byte-value level.)
- *
- * This replacement function however works at character level and should
- * therefore be "immune" to character set differences - so no charset
- * parameter is needed or provided. If a third parameter is passed, it will
- * be silently ignored.
- *
- * In the OUTPUT there is a minor difference in that we use ''' instead
- * of PHP's ''' for a single quote: this provides compatibility with
- * get_html_translation_table(HTML_SPECIALCHARS, ENT_QUOTES)
- * (see comment by mikiwoz at yahoo dot co dot uk on
- * http://php.net/htmlspecialchars); it also matches the entity definition
- * for XML 1.0
- * (http://www.w3.org/TR/xhtml1/dtds.html#a_dtd_Special_characters).
- * Like PHP we use a numeric character reference instead of ''' for the
- * single quote. For the other special characters we use the named entity
- * references, as PHP is doing.
- *
- * @author {@link http://wikkawiki.org/JavaWoman Marjolein Katsma}
- *
- * @license http://www.gnu.org/copyleft/lgpl.html
- * GNU Lesser General Public License
- * @copyright Copyright 2007, {@link http://wikkawiki.org/CreditsPage
- * Wikka Development Team}
- *
- * @access private
- * @param string $string string to be converted
- * @param integer $quote_style
- * - ENT_COMPAT: escapes &, <, > and double quote (default)
- * - ENT_NOQUOTES: escapes only &, < and >
- * - ENT_QUOTES: escapes &, <, >, double and single quotes
- * @return string converted string
- * @since 1.0.7.18
- */
- function hsc($string, $quote_style = ENT_COMPAT) {
- // init
- static $aTransSpecchar = array(
- '&' => '&',
- '"' => '"',
- '<' => '<',
- '>' => '>',
- //This fix is related to SF#1923020, but has to be applied
- //regardless of actually highlighting symbols.
- //Circumvent a bug with symbol highlighting
- //This is required as ; would produce undesirable side-effects if it
- //was not to be processed as an entity.
- ';' => '<SEMI>', // Force ; to be processed as entity
- '|' => '<PIPE>' // Force | to be processed as entity
- ); // ENT_COMPAT set
- switch ($quote_style) {
- case ENT_NOQUOTES: // don't convert double quotes
- unset($aTransSpecchar['"']);
- break;
- case ENT_QUOTES: // convert single quotes as well
- $aTransSpecchar["'"] = '''; // (apos) htmlspecialchars() uses '''
- break;
- }
- // return translated string
- return strtr($string, $aTransSpecchar);
- }
- function _genCSSName($name){
- return (is_numeric($name[0]) ? '_' : '') . $name;
- }
- /**
- * Returns a stylesheet for the highlighted code. If $economy mode
- * is true, we only return the stylesheet declarations that matter for
- * this code block instead of the whole thing
- *
- * @param boolean Whether to use economy mode or not
- * @return string A stylesheet built on the data for the current language
- * @since 1.0.0
- */
- function get_stylesheet($economy_mode = true) {
- // If there's an error, chances are that the language file
- // won't have populated the language data file, so we can't
- // risk getting a stylesheet...
- if ($this->error) {
- return '';
- }
- //Check if the style rearrangements have been processed ...
- //This also does some preprocessing to check which style groups are useable ...
- if(!isset($this->language_data['NUMBERS_CACHE'])) {
- $this->build_style_cache();
- }
- // First, work out what the selector should be. If there's an ID,
- // that should be used, the same for a class. Otherwise, a selector
- // of '' means that these styles will be applied anywhere
- if ($this->overall_id) {
- $selector = '#' . $this->_genCSSName($this->overall_id);
- } else {
- $selector = '.' . $this->_genCSSName($this->language);
- if ($this->overall_class) {
- $selector .= '.' . $this->_genCSSName($this->overall_class);
- }
- }
- $selector .= ' ';
- // Header of the stylesheet
- if (!$economy_mode) {
- $stylesheet = "/**\n".
- " * GeSHi Dynamically Generated Stylesheet\n".
- " * --------------------------------------\n".
- " * Dynamically generated stylesheet for {$this->language}\n".
- " * CSS class: {$this->overall_class}, CSS id: {$this->overall_id}\n".
- " * GeSHi (C) 2004 - 2007 Nigel McNie, 2007 - 2008 Benny Baumann\n" .
- " * (http://qbnz.com/highlighter/ and http://geshi.org/)\n".
- " * --------------------------------------\n".
- " */\n";
- } else {
- $stylesheet = "/**\n".
- " * GeSHi (C) 2004 - 2007 Nigel McNie, 2007 - 2008 Benny Baumann\n" .
- " * (http://qbnz.com/highlighter/ and http://geshi.org/)\n".
- " */\n";
- }
- // Set the <ol> to have no effect at all if there are line numbers
- // (<ol>s have margins that should be destroyed so all layout is
- // controlled by the set_overall_style method, which works on the
- // <pre> or <div> container). Additionally, set default styles for lines
- if (!$economy_mode || $this->line_numbers != GESHI_NO_LINE_NUMBERS) {
- //$stylesheet .= "$selector, {$selector}ol, {$selector}ol li {margin: 0;}\n";
- $stylesheet .= "$selector.de1, $selector.de2 {{$this->code_style}}\n";
- }
- // Add overall styles
- // note: neglect economy_mode, empty styles are meaningless
- if ($this->overall_style != '') {
- $stylesheet .= "$selector {{$this->overall_style}}\n";
- }
- // Add styles for links
- // note: economy mode does not make _any_ sense here
- // either the style is empty and thus no selector is needed
- // or the appropriate key is given.
- foreach ($this->link_styles as $key => $style) {
- if ($style != '') {
- switch ($key) {
- case GESHI_LINK:
- $stylesheet .= "{$selector}a:link {{$style}}\n";
- break;
- case GESHI_HOVER:
- $stylesheet .= "{$selector}a:hover {{$style}}\n";
- break;
- case GESHI_ACTIVE:
- $stylesheet .= "{$selector}a:active {{$style}}\n";
- break;
- case GESHI_VISITED:
- $stylesheet .= "{$selector}a:visited {{$style}}\n";
- break;
- }
- }
- }
- // Header and footer
- // note: neglect economy_mode, empty styles are meaningless
- if ($this->header_content_style != '') {
- $stylesheet .= "$selector.head {{$this->header_content_style}}\n";
- }
- if ($this->footer_content_style != '') {
- $stylesheet .= "$selector.foot {{$this->footer_content_style}}\n";
- }
- // Styles for important stuff
- // note: neglect economy_mode, empty styles are meaningless
- if ($this->important_styles != '') {
- $stylesheet .= "$selector.imp {{$this->important_styles}}\n";
- }
- // Simple line number styles
- if ((!$economy_mode || $this->line_numbers != GESHI_NO_LINE_NUMBERS) && $this->line_style1 != '') {
- $stylesheet .= "{$selector}li, {$selector}.li1 {{$this->line_style1}}\n";
- }
- if ((!$economy_mode || $this->line_numbers != GESHI_NO_LINE_NUMBERS) && $this->table_linenumber_style != '') {
- $stylesheet .= "{$selector}.ln {{$this->table_linenumber_style}}\n";
- }
- // If there is a style set for fancy line numbers, echo it out
- if ((!$economy_mode || $this->line_numbers == GESHI_FANCY_LINE_NUMBERS) && $this->line_style2 != '') {
- $stylesheet .= "{$selector}.li2 {{$this->line_style2}}\n";
- }
- // note: empty styles are meaningless
- foreach ($this->language_data['STYLES']['KEYWORDS'] as $group => $styles) {
- if ($styles != '' && (!$economy_mode ||
- (isset($this->lexic_permissions['KEYWORDS'][$group]) &&
- $this->lexic_permissions['KEYWORDS'][$group]))) {
- $stylesheet .= "$selector.kw$group {{$styles}}\n";
- }
- }
- foreach ($this->language_data['STYLES']['COMMENTS'] as $group => $styles) {
- if ($styles != '' && (!$economy_mode ||
- (isset($this->lexic_permissions['COMMENTS'][$group]) &&
- $this->lexic_permissions['COMMENTS'][$group]) ||
- (!empty($this->language_data['COMMENT_REGEXP']) &&
- !empty($this->language_data['COMMENT_REGEXP'][$group])))) {
- $stylesheet .= "$selector.co$group {{$styles}}\n";
- }
- }
- foreach ($this->language_data['STYLES']['ESCAPE_CHAR'] as $group => $styles) {
- if ($styles != '' && (!$economy_mode || $this->lexic_permissions['ESCAPE_CHAR'])) {
- // NEW: since 1.0.8 we have to handle hardescapes
- if ($group === 'HARD') {
- $group = '_h';
- }
- $stylesheet .= "$selector.es$group {{$styles}}\n";
- }
- }
- foreach ($this->language_data['STYLES']['BRACKETS'] as $group => $styles) {
- if ($styles != '' && (!$economy_mode || $this->lexic_permissions['BRACKETS'])) {
- $stylesheet .= "$selector.br$group {{$styles}}\n";
- }
- }
- foreach ($this->language_data['STYLES']['SYMBOLS'] as $group => $styles) {
- if ($styles != '' && (!$economy_mode || $this->lexic_permissions['SYMBOLS'])) {
- $stylesheet .= "$selector.sy$group {{$styles}}\n";
- }
- }
- foreach ($this->language_data['STYLES']['STRINGS'] as $group => $styles) {
- if ($styles != '' && (!$economy_mode || $this->lexic_permissions['STRINGS'])) {
- // NEW: since 1.0.8 we have to handle hardquotes
- if ($group === 'HARD') {
- $group = '_h';
- }
- $stylesheet .= "$selector.st$group {{$styles}}\n";
- }
- }
- foreach ($this->language_data['STYLES']['NUMBERS'] as $group => $styles) {
- if ($styles != '' && (!$economy_mode || $this->lexic_permissions['NUMBERS'])) {
- $stylesheet .= "$selector.nu$group {{$styles}}\n";
- }
- }
- foreach ($this->language_data['STYLES']['METHODS'] as $group => $styles) {
- if ($styles != '' && (!$economy_mode || $this->lexic_permissions['METHODS'])) {
- $stylesheet .= "$selector.me$group {{$styles}}\n";
- }
- }
- // note: neglect economy_mode, empty styles are meaningless
- foreach ($this->language_data['STYLES']['SCRIPT'] as $group => $styles) {
- if ($styles != '') {
- $stylesheet .= "$selector.sc$group {{$styles}}\n";
- }
- }
- foreach ($this->language_data['STYLES']['REGEXPS'] as $group => $styles) {
- if ($styles != '' && (!$economy_mode ||
- (isset($this->lexic_permissions['REGEXPS'][$group]) &&
- $this->lexic_permissions['REGEXPS'][$group]))) {
- if (is_array($this->language_data['REGEXPS'][$group]) &&
- array_key_exists(GESHI_CLASS, $this->language_data['REGEXPS'][$group])) {
- $stylesheet .= "$selector.";
- $stylesheet .= $this->language_data['REGEXPS'][$group][GESHI_CLASS];
- $stylesheet .= " {{$styles}}\n";
- } else {
- $stylesheet .= "$selector.re$group {{$styles}}\n";
- }
- }
- }
- // Styles for lines being highlighted extra
- if (!$economy_mode || (count($this->highlight_extra_lines)!=count($this->highlight_extra_lines_styles))) {
- $stylesheet .= "{$selector}.ln-xtra, {$selector}li.ln-xtra, {$selector}div.ln-xtra {{$this->highlight_extra_lines_style}}\n";
- }
- $stylesheet .= "{$selector}span.xtra { display:block; }\n";
- foreach ($this->highlight_extra_lines_styles as $lineid => $linestyle) {
- $stylesheet .= "{$selector}.lx$lineid, {$selector}li.lx$lineid, {$selector}div.lx$lineid {{$linestyle}}\n";
- }
- return $stylesheet;
- }
- /**
- * Get's the style that is used for the specified line
- *
- * @param int The line number information is requested for
- * @access private
- * @since 1.0.7.21
- */
- function get_line_style($line) {
- //$style = null;
- $style = null;
- if (isset($this->highlight_extra_lines_styles[$line])) {
- $style = $this->highlight_extra_lines_styles[$line];
- } else { // if no "extra" style assigned
- $style = $this->highlight_extra_lines_style;
- }
- return $style;
- }
- /**
- * this functions creates an optimized regular expression list
- * of an array of strings.
- *
- * Example:
- * <code>$list = array('faa', 'foo', 'foobar');
- * => string 'f(aa|oo(bar)?)'</code>
- *
- * @param $list array of (unquoted) strings
- * @param $regexp_delimiter your regular expression delimiter, @see preg_quote()
- * @return string for regular expression
- * @author Milian Wolff <mail@milianw.de>
- * @since 1.0.8
- * @access private
- */
- function optimize_regexp_list($list, $regexp_delimiter = '/') {
- $regex_chars = array('.', '\\', '+', '-', '*', '?', '[', '^', ']', '$',
- '(', ')', '{', '}', '=', '!', '<', '>', '|', ':', $regexp_delimiter);
- sort($list);
- $regexp_list = array('');
- $num_subpatterns = 0;
- $list_key = 0;
- // the tokens which we will use to generate the regexp list
- $tokens = array();
- $prev_keys = array();
- // go through all entries of the list and generate the token list
- $cur_len = 0;
- for ($i = 0, $i_max = count($list); $i < $i_max; ++$i) {
- if ($cur_len > GESHI_MAX_PCRE_LENGTH) {
- // seems like the length of this pcre is growing exorbitantly
- $regexp_list[++$list_key] = $this->_optimize_regexp_list_tokens_to_string($tokens);
- $num_subpatterns = substr_count($regexp_list[$list_key], '(?:');
- $tokens = array();
- $cur_len = 0;
- }
- $level = 0;
- $entry = preg_quote((string) $list[$i], $regexp_delimiter);
- $pointer = &$tokens;
- // properly assign the new entry to the correct position in the token array
- // possibly generate smaller common denominator keys
- while (true) {
- // get the common denominator
- if (isset($prev_keys[$level])) {
- if ($prev_keys[$level] == $entry) {
- // this is a duplicate entry, skip it
- continue 2;
- }
- $char = 0;
- while (isset($entry[$char]) && isset($prev_keys[$level][$char])
- && $entry[$char] == $prev_keys[$level][$char]) {
- ++$char;
- }
- if ($char > 0) {
- // this entry has at least some chars in common with the current key
- if ($char == strlen($prev_keys[$level])) {
- // current key is totally matched, i.e. this entry has just some bits appended
- $pointer = &$pointer[$prev_keys[$level]];
- } else {
- // only part of the keys match
- $new_key_part1 = substr($prev_keys[$level], 0, $char);
- $new_key_part2 = substr($prev_keys[$level], $char);
- if (in_array($new_key_part1[0], $regex_chars)
- || in_array($new_key_part2[0], $regex_chars)) {
- // this is bad, a regex char as first character
- $pointer[$entry] = array('' => true);
- array_splice($prev_keys, $level, count($prev_keys), $entry);
- $cur_len += strlen($entry);
- continue;
- } else {
- // relocate previous tokens
- $pointer[$new_key_part1] = array($new_key_part2 => $pointer[$prev_keys[$level]]);
- unset($pointer[$prev_keys[$level]]);
- $pointer = &$pointer[$new_key_part1];
- // recreate key index
- array_splice($prev_keys, $level, count($prev_keys), array($new_key_part1, $new_key_part2));
- $cur_len += strlen($new_key_part2);
- }
- }
- ++$level;
- $entry = substr($entry, $char);
- continue;
- }
- // else: fall trough, i.e. no common denominator was found
- }
- if ($level == 0 && !empty($tokens)) {
- // we can dump current tokens into the string and throw them away afterwards
- $new_entry = $this->_optimize_regexp_list_tokens_to_string($tokens);
- $new_subpatterns = substr_count($new_entry, '(?:');
- if (GESHI_MAX_PCRE_SUBPATTERNS && $num_subpatterns + $new_subpatterns > GESHI_MAX_PCRE_SUBPATTERNS) {
- $regexp_list[++$list_key] = $new_entry;
- $num_subpatterns = $new_subpatterns;
- } else {
- if (!empty($regexp_list[$list_key])) {
- $new_entry = '|' . $new_entry;
- }
- $regexp_list[$list_key] .= $new_entry;
- $num_subpatterns += $new_subpatterns;
- }
- $tokens = array();
- $cur_len = 0;
- }
- // no further common denominator found
- $pointer[$entry] = array('' => true);
- array_splice($prev_keys, $level, count($prev_keys), $entry);
- $cur_len += strlen($entry);
- break;
- }
- unset($list[$i]);
- }
- // make sure the last tokens get converted as well
- $new_entry = $this->_optimize_regexp_list_tokens_to_string($tokens);
- if (GESHI_MAX_PCRE_SUBPATTERNS && $num_subpatterns + substr_count($new_entry, '(?:') > GESHI_MAX_PCRE_SUBPATTERNS) {
- if ( !empty($regexp_list[$list_key]) ) {
- ++$list_key;
- }
- $regexp_list[$list_key] = $new_entry;
- } else {
- if (!empty($regexp_list[$list_key])) {
- $new_entry = '|' . $new_entry;
- }
- $regexp_list[$list_key] .= $new_entry;
- }
- return $regexp_list;
- }
- /**
- * this function creates the appropriate regexp string of an token array
- * you should not call this function directly, @see $this->optimize_regexp_list().
- *
- * @param &$tokens array of tokens
- * @param $recursed bool to know wether we recursed or not
- * @return string
- * @author Milian Wolff <mail@milianw.de>
- * @since 1.0.8
- * @access private
- */
- function _optimize_regexp_list_tokens_to_string(&$tokens, $recursed = false) {
- $list = '';
- foreach ($tokens as $token => $sub_tokens) {
- $list .= $token;
- $close_entry = isset($sub_tokens['']);
- unset($sub_tokens['']);
- if (!empty($sub_tokens)) {
- $list .= '(?:' . $this->_optimize_regexp_list_tokens_to_string($sub_tokens, true) . ')';
- if ($close_entry) {
- // make sub_tokens optional
- $list .= '?';
- }
- }
- $list .= '|';
- }
- if (!$recursed) {
- // do some optimizations
- // common trailing strings
- // BUGGY!
- //$list = preg_replace_callback('#(?<=^|\:|\|)\w+?(\w+)(?:\|.+\1)+(?=\|)#', create_function(
- // '$matches', 'return "(?:" . preg_replace("#" . preg_quote($matches[1], "#") . "(?=\||$)#", "", $matches[0]) . ")" . $matches[1];'), $list);
- // (?:p)? => p?
- $list = preg_replace('#\(\?\:(.)\)\?#', '\1?', $list);
- // (?:a|b|c|d|...)? => [abcd...]?
- // TODO: a|bb|c => [ac]|bb
- static $callback_2;
- if (!isset($callback_2)) {
- $callback_2 = create_function('$matches', 'return "[" . str_replace("|", "", $matches[1]) . "]";');
- }
- $list = preg_replace_callback('#\(\?\:((?:.\|)+.)\)#', $callback_2, $list);
- }
- // return $list without trailing pipe
- return substr($list, 0, -1);
- }
- } // End Class GeSHi
- if (!function_exists('geshi_highlight')) {
- /**
- * Easy way to highlight stuff. Behaves just like highlight_string
- *
- * @param string The code to highlight
- * @param string The language to highlight the code in
- * @param string The path to the language files. You can leave this blank if you need
- * as from version 1.0.7 the path should be automatically detected
- * @param boolean Whether to return the result or to echo
- * @return string The code highlighted (if $return is true)
- * @since 1.0.2
- */
- function geshi_highlight($string, $language, $path = null, $return = false) {
- $geshi = new GeSHi($string, $language, $path);
- $geshi->set_header_type(GESHI_HEADER_NONE);
- if ($return) {
- return '<code>' . $geshi->parse_code() . '</code>';
- }
- echo '<code>' . $geshi->parse_code() . '</code>';
- if ($geshi->error()) {
- return false;
- }
- return true;
- }
- }
- ?>
|